Rob.Barat Posted October 7, 2005 Share Posted October 7, 2005 Hi, I've had this memory installed (2 x modules) for over a year now running at rated settings (2/2/2/5 ~2.6V) with no problem. A few days ago my pc reported a hard disk error and after much investigation I found it was one of the memory modules. By itself my PC won't even post (gets long beeps) In dual channel it will post and load memtest, but gets errors almost straight away. I've tried with relaxed timings and increased voltage (3/4/4/8 ~ 2.8V) however this made no difference. On a friends PC (running at 133mhz FSB) the PC will POST but crash right after the POST screen. Is there anything else I can try? I live in Australia so if replacement is required I can send the sticks back to Corsair. Regards Rob Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted October 7, 2005 Corsair Employee Share Posted October 7, 2005 Let's get them both replaced. Please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.