ICUE & other brands addressable RGB fans

I planning to buy MasterCase H500M, the fans in that case are an addressable RGB which uses WS2812B protocol.

 

can i control the fans using ICUE, How?

It really depends on the connector - it looks like the fans have an Aura style connector. IF that's the case, then you can use a Corsair to Aura adapter and then a 2x Aura splitter.

 

If you want to make your own adapter, you can check out http://forum.corsair.com/v3/showthread.php?t=174759 for the Corsair side of things.

 

Or if you just want to buy them, you can get them here: https://www.ebay.com/str/piratedogtech.

DevBiker's suggest should work. The effects in iCUE will vary as you will have to set the 200MM fans as 4xML fans or 1xLL fan as the Fans have 8 LEDs each with two fans total. I personally haven't tried as I replaced the 200MM fans with 3xHD-120 fans.

DevBiker's suggest should work. The effects in iCUE will vary as you will have to set the 200MM fans as 4xML fans or 1xLL fan as the Fans have 8 LEDs each with two fans total. I personally haven't tried as I replaced the 200MM fans with 3xHD-120 fans.

 

If they have 8 LEDs each, with a splitter, you'd set them a 2x ML fans and they'd be duplicated. The Aura cables don't run in series like the Corsair cables and fans do - they run in parallel.

If they have 8 LEDs each, with a splitter, you'd set them a 2x ML fans and they'd be duplicated. The Aura cables don't run in series like the Corsair cables and fans do - they run in parallel.

 

Wow good catch there, I must still be tired!