Techial Posted July 4, 2017 Share Posted July 4, 2017 (edited) So everyone knows there's this new craze about putting LEDs on everything, well that includes RAM. In fact, I quite enjoy this craze as some modules look astonishing! (Looking at you Vengeance LED) and http://www.corsair.com/en-gb/~/media/185F5D82A05048A4876881AE90DAD92B.ashx Just look at this, there are honestly no words to describe how beautiful this is! However, there's a slight problem! A lot of motherboards today are dual-channel, so to squeeze the most performance out you'll need to be running with two good sticks only. This leaves a gap between the RAM sticks open, which in my opinion doesn't really look nice. What I would like (and many others) are dummy sticks to fill up those unused spots. Everyone loves looking at those systems filled with lots of RAM sticks with flashing lights, so why not be able to build a high-performance system as well as a good looking one? They would be a lot cheaper to produce as well. A dummy stick with LED might be hard to make without causing some BIOS issues, but hopefully this can be resolved in some smart way. Would any of you reading this like a product like that? (Dummy RAM stick, maybe of the Corsair Vengeance LED; the sexy one) Share your thoughts in the thread. EDIT: Apparently, Reddit is backing up the idea. Edited July 4, 2017 by Techial Link to comment Share on other sites More sharing options...
Zotty Posted July 5, 2017 Share Posted July 5, 2017 I like your thinking sir.. count me in Link to comment Share on other sites More sharing options...
MadBullBunny Posted July 5, 2017 Share Posted July 5, 2017 Problem has already been solved though. https://www.amazon.com/ROG-Strix-Z270I-Gaming-Motherboards/dp/B01MZBUDUU/ref=sr_1_1?ie=UTF8&qid=1499231218&sr=8-1&keywords=z270i Link to comment Share on other sites More sharing options...
Techial Posted July 6, 2017 Author Share Posted July 6, 2017 Problem has already been solved though. https://www.amazon.com/ROG-Strix-Z270I-Gaming-Motherboards/dp/B01MZBUDUU/ref=sr_1_1?ie=UTF8&qid=1499231218&sr=8-1&keywords=z270i Mini-ITX though. I'm not sure if decreasing the amount of RAM slots makes it prettier though, but yeah it could be a temp solution I guess. Link to comment Share on other sites More sharing options...
MadBullBunny Posted July 7, 2017 Share Posted July 7, 2017 (edited) Mini-ITX though. I'm not sure if decreasing the amount of RAM slots makes it prettier though, but yeah it could be a temp solution I guess. idk mine looks pretty good. http://imgur.com/a/1SLRT Edited July 7, 2017 by MadBullBunny Link to comment Share on other sites More sharing options...
Corsair Employee Corsair CJ Posted July 10, 2017 Corsair Employee Share Posted July 10, 2017 The main concern I can see brought up by having dummy modules in the wild is that a customer could mistakenly buy them thinking that they are an actual kit of DRAM. There's also the possibility of people using the modules for more nefarious purposes such as swapping them out for a kit of actual DRAM for RMA/returns and reselling platforms like Craigslist/eBay. It's a cool idea and I can see it make its way into a neat mod, but the risk of mischief is seemingly quite high. 1 Link to comment Share on other sites More sharing options...
Techial Posted July 22, 2017 Author Share Posted July 22, 2017 (edited) I know I'm not the best designer (I'm extremely terrible at it haha), but would something like a giant "window" in the middle prevent it from looking like RAM stick so you can't use it to scam people, and still be cool to put in? (Maybe put some RGB lights around the "window" edges"). Here's a quick paint file I made in 15 seconds showing a rough idea of how it could look like. (The gray being a see-through window) http://i.techial.net/20170722121942.png Edited July 22, 2017 by Techial Link to comment Share on other sites More sharing options...
THX113.8 Posted July 22, 2017 Share Posted July 22, 2017 The main concern I can see brought up by having dummy modules in the wild is that a customer could mistakenly buy them thinking that they are an actual kit of DRAM. There's also the possibility of people using the modules for more nefarious purposes such as swapping them out for a kit of actual DRAM for RMA/returns and reselling platforms like Craigslist/eBay. It's a cool idea and I can see it make its way into a neat mod, but the risk of mischief is seemingly quite high. Maybe it could have "THIS IS NOT RAM" or whatever printed on the side, if that won't be visible when in use. Link to comment Share on other sites More sharing options...
Zotty Posted December 7, 2018 Share Posted December 7, 2018 Well look what we have here..... Link to comment Share on other sites More sharing options...
Mr_Rata Posted December 9, 2018 Share Posted December 9, 2018 I would like to add to my corsair lpx RGB heatsink to use with corsair link ... i love my memories and would not want to change it ..it's very expensive if decide to buy new rgb memories,and must to try sell old ones .. Link to comment Share on other sites More sharing options...
Z.S Posted December 9, 2018 Share Posted December 9, 2018 (edited) Make the Fake RAM distinguishable from real RAM from the sides at least the top needs to match the real RAM but if there is an engraving in the dummy RAM sticks on the side then it makes it harder for people to resell them as real RAM sticks EDIT also I think £40 is a little too steep I would pay £35 max for it especially since it is worth as much as the Lighting Node Pro and I have seen it for that low of a price before Edited December 9, 2018 by Z.S Link to comment Share on other sites More sharing options...
videodj Posted December 9, 2018 Share Posted December 9, 2018 They are a bit expensive, but a lot cheaper than additional RAM modules. I've currently got 2 pair of 16GB RGB Pro's (32GB), but I don't like the gaps. I don't really need anymore RAM, so these will do fine, just ordered some and will report back once I've got them and fitted them. Link to comment Share on other sites More sharing options...
Mr_Rata Posted December 10, 2018 Share Posted December 10, 2018 Would be nice if corsair release similar product as TT : https://www.thermaltake.com/Cooler/Liquid_Cooler_/Others/C_00003373/Pacific_R1_Plus_DDR4_Memory_Lighting_Kit/design.htm I sure buy it !to light up my lpx memories! Link to comment Share on other sites More sharing options...
Zotty Posted December 10, 2018 Share Posted December 10, 2018 Would be nice if corsair release similar product as TT : https://www.thermaltake.com/Cooler/Liquid_Cooler_/Others/C_00003373/Pacific_R1_Plus_DDR4_Memory_Lighting_Kit/design.htm I sure buy it !to light up my lpx memories! but much better looking right? i sure would like to make my wifes 32gb of DDR3 Dominator Platinum Pro have some RGBz........... Link to comment Share on other sites More sharing options...
Mr_Rata Posted December 11, 2018 Share Posted December 11, 2018 (edited) Yep.. would be nice,connect similar RGB ram decoration to my commander pro. I hope corsair hear us! Edited December 11, 2018 by Mr_Rata Link to comment Share on other sites More sharing options...
Corsair Employee Corsair CJ Posted December 11, 2018 Corsair Employee Share Posted December 11, 2018 (edited) Good to see this thread again... ;) So first off, The Light Enhancement Module kits have a different part number on the rear label to distinguish them from normal modules while still looking as close to identical to a normal kit of RAM as we can allow, we are keeping an eye on this though and can tweak this if we notice that users are getting these mixed up with normal kits of DRAM. Second, We already have an accessory that adds RGB lighting to non-RGB memory (when connected to Commander PRO or Lighting Node PRO). You also get the added benefit of additional cooling for your RAM and other components directly on your mobo! https://www.corsair.com/us/en/Categories/Products/Accessories-%7C-Parts/Dominator-Airflow-Platinum-RGB-Fan/p/CMDAF2 The above is actually the newest version, we have an older version of this that is also RGB (single zone instead of individually addressable) for users with Commander Mini. You'll notice that this older version is called Airflow Platinum LED (instead of RGB), it'll also have the older version of the CORSAIR Sails logo. https://www.corsair.com/us/en/Categories/Products/Accessories-%7C-Parts/PC-Components/Memory/DOMINATOR%C2%AE-Airflow-PLATINUM-LED-Fan/p/CMDAF Edited December 11, 2018 by Corsair CJ Clarification. Link to comment Share on other sites More sharing options...
Zotty Posted December 11, 2018 Share Posted December 11, 2018 I have both those units lol. both work well at what they do but to cover up the beauty of a full set of Dom Plat Pro's would be a sin lol. But then again.... there are those that would say RGB on Dom Plat Pro in any way would be a sin anyways lol.... Link to comment Share on other sites More sharing options...
Mr_Rata Posted December 12, 2018 Share Posted December 12, 2018 I guess it must not fit as well with lpx ram ... Link to comment Share on other sites More sharing options...
Zotty Posted December 12, 2018 Share Posted December 12, 2018 I guess it must not fit as well with lpx ram ... It would work fine buddy.. it clips to the little levers that holds your ram in pace.. Link to comment Share on other sites More sharing options...
6297J Posted December 13, 2018 Share Posted December 13, 2018 (edited) Apologies if this is a dumb question but does this statement - *This Light Enhancement kit does not contain any DDR4 memory. A separately purchased Vengeance RGB PRO Memory Kit is required for your system to function. - mean that I need to have existing Vengeance RGB modules for these to work or will they work alongside existing memory modules? I just have plain old non LED Vengeance DDR4 modules currently in place. Many thanks Edited December 13, 2018 by 6297J Link to comment Share on other sites More sharing options...
videodj Posted December 14, 2018 Share Posted December 14, 2018 (edited) I got my light enhancement kit today, and fitted along side my Vegeance Pro RGB. iCue picked it up straight away and treats it the same as the normal ram and all effects are available. Overall I'm happy with the kit and would recommend it. The blue dimms are the light enhancement kit. Edited December 20, 2018 by videodj Link to comment Share on other sites More sharing options...
6297J Posted December 19, 2018 Share Posted December 19, 2018 Apologies if this is a dumb question but does this statement - *This Light Enhancement kit does not contain any DDR4 memory. A separately purchased Vengeance RGB PRO Memory Kit is required for your system to function. - mean that I need to have existing Vengeance RGB modules for these to work or will they work alongside existing memory modules? I just have plain old non LED Vengeance DDR4 modules currently in place. Many thanks I can answer my own question - Yes - it works beautifully but No - you can't use two with an IX Hero MB with an NH-U14S cooler - only one will fit. But it still looks great. Link to comment Share on other sites More sharing options...
Peter Y Posted September 29, 2019 Share Posted September 29, 2019 Will corsair make RGB lighting for the non pro vengance sticks Link to comment Share on other sites More sharing options...
Zotty Posted September 30, 2019 Share Posted September 30, 2019 Will corsair make RGB lighting for the non pro vengance sticks Can't see it... i also asked same question for the Dominator RGB and that looked doubtful.. but you never know.. Corsair never comment on unreleased products Link to comment Share on other sites More sharing options...
Recommended Posts