mrshrir Posted March 14, 2019 Share Posted March 14, 2019 lets say i wanted to use 8 fans . AND led strips, i have the NODE and HUB .... now the HUB has place only for 6 fans, i understand i can get power from splitters and so on ... but how would you connect the other 2 RGB Cables ? Link to comment Share on other sites More sharing options...
Zotty Posted March 14, 2019 Share Posted March 14, 2019 (edited) Hi Buddy. Have a read of the Below linked thread. covers the Corsair RGB Ecosystem in detail including device specs and set up diagrams. http://forum.corsair.com/v3/showthread.php?t=173880 That should let you work out a few ways to go about it Buddy :) Edited March 14, 2019 by Zotty Link to comment Share on other sites More sharing options...
mrshrir Posted March 14, 2019 Author Share Posted March 14, 2019 Yeah I have ... so do I just connect an additional hub to the 2nd channel on the node pro ? Link to comment Share on other sites More sharing options...
Zotty Posted March 14, 2019 Share Posted March 14, 2019 (edited) yes dude thats the correct way to do it.,, but you want strips also? which means 3 LED channels needed.. there is a User here Called DevBiker... he makes cables that allow yous to fiddle the system ;).... Edited March 14, 2019 by Zotty Link to comment Share on other sites More sharing options...
DevBiker Posted March 14, 2019 Share Posted March 14, 2019 For the LL fans, you'd need to have 2 fan hubs. You can put a seventh on an existing hub with an RGB Fan splitter but 8 will draw too much power. However, what you can do with a second fan hub is a fan hub splitter. This will allow you to put 2 fan hubs on a single channel. Now, they will be mirrors of each other but it'll work. In your case, you'd put 4 LL fans on each fan hub. Link to comment Share on other sites More sharing options...
mrshrir Posted March 14, 2019 Author Share Posted March 14, 2019 and what about the LED STRIPS , can those be connected too ? Link to comment Share on other sites More sharing options...
DevBiker Posted March 15, 2019 Share Posted March 15, 2019 Yes. The Fan Hub Splitter and the 2 fan hubs would go on 1 channel, the fan strips would go on the second channel. Link to comment Share on other sites More sharing options...
mrshrir Posted March 15, 2019 Author Share Posted March 15, 2019 "fan hub splitter" is this a separate cable of some sort ? Link to comment Share on other sites More sharing options...
DevBiker Posted March 15, 2019 Share Posted March 15, 2019 Yes, it is. AFAIK, it's only available here: https://www.ebay.com/str/piratedogtech. Or, if you want to build your own, you can check out http://forum.corsair.com/v3/showthread.php?t=174759. Link to comment Share on other sites More sharing options...
D7AMESKYRI Posted July 5, 2020 Share Posted July 5, 2020 DevBiker, I have a similar setup but instead, I have a Commander Pro. My Setup: X3 Front LL120 x2 Top LL120 (with the H100i Platinum SE installed CPU Cooler) x1 rear ll12 x2 bottom ll120 I have my front 3, rear, and bottom 2 connected to the hub and that goes into channel 1 of the Como pro and then the 4 RGB strips into channel 2 Is there a way to setup X8 LL120 fans and a light strip to the commander pro in order to use the Sequential lighting effect? Lighting Link In ICUE does work to link all ICUE compatible devices and effects like Visor, Rain, Rainbow wave, etc, but it doesn't have a sequential option for Lighting Link. Can what I want be achieved? Link to comment Share on other sites More sharing options...
Zotty Posted July 6, 2020 Share Posted July 6, 2020 Is there a way to setup X8 LL120 fans and a light strip to the commander pro in order to use the Sequential lighting effect? unfortunately its all based around 6 fans buddy.. none of the pre programmed effects will travel past 6 fans. (pong etc) Link to comment Share on other sites More sharing options...
Devil_U_Know Posted January 17, 2021 Share Posted January 17, 2021 I currently have a Corsair Crystal Series 680X RGB and I'm using Corsair H100i RGB PLATINUM AIO with Dual ML120 PRO RGB PWM Fans, the case have 3 LL120 RGB fans and for the back I'm using a Corsair iCUE SP120 RGB Pro. I'm using the Lighting Node pro and RGB Fan LED Hub that came with the case. I'm thinking on adding 2 more fans to the bottom of the case, my question is which fan should I buy and also, what do I need to be able to connect the 2 extra fans since all the ports of the hub are in use? Link to comment Share on other sites More sharing options...
Zotty Posted January 17, 2021 Share Posted January 17, 2021 have a good read of my faq buddy... holla if needed.. https://forum.corsair.com/v3/showthread.php?t=173880 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now