Tywnnvlad Posted January 3, 2019 Share Posted January 3, 2019 I recently bought a HX1000 on my new build. After putting my build together I noticed that It only does 2 clicks and it wont power my motherboard. It will only light up the LED on all my mobo for a second and the ram will have its LED turned on. Thats it, no debugging led on mobo or anything. I tried jumping it too(paperclip) and I only get 2 clicks then done. Link to comment Share on other sites More sharing options...
DevBiker Posted January 3, 2019 Share Posted January 3, 2019 It may be broken or you may have a cable missing (all CPU cables connected?) or you may have a short somewhere. Are you using only the cables that came with the PSU? Also, start with just the motherboard and, if necessary, the cooler. Disconnect anything not essential. Does it start? If so, then add additional devices in. Link to comment Share on other sites More sharing options...
cplifj Posted January 11, 2019 Share Posted January 11, 2019 Strangest thing but yesterday my HX1000i gave me the same experience after a normal shutdown all of a sudden. Two clicks and no boot at all. Like it went in protection mode. i removed the powerplug and saw still power on the mobo, this was from a powered usb hub, disconnected that for a boot and it indeed booted again. So i think something went wrong in the mobo powerdellivery at usb level. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.