trungdtdev Posted April 20, 2012 Share Posted April 20, 2012 Update Corsair Force FW 2.4 for F120GB2 no drivers found ! Help me ! http://i692.photobucket.com/albums/vv282/trungdtdev/updatefirmware.png Link to comment Share on other sites More sharing options...
Wired Posted April 20, 2012 Share Posted April 20, 2012 Do you have it plugged into an Intel or AMD SATA port? Link to comment Share on other sites More sharing options...
trungdtdev Posted April 20, 2012 Author Share Posted April 20, 2012 I'm plugged into Intel port and ACHI mode is enabled in Bios My Laptop : Qosmio X505-Q870 Link to comment Share on other sites More sharing options...
Toasted Posted April 21, 2012 Share Posted April 21, 2012 If possible, try it on a desktop computer. Link to comment Share on other sites More sharing options...
trungdtdev Posted April 21, 2012 Author Share Posted April 21, 2012 If possible, try it on a desktop computer. I do not have desktop computer ... Why try on desktop ? Sorry for my terrible English Link to comment Share on other sites More sharing options...
trungdtdev Posted April 21, 2012 Author Share Posted April 21, 2012 My SSD slow and i want Update firmware :(( My Laptop have 2 drivers 1st my HDD : http://i692.photobucket.com/albums/vv282/trungdtdev/HDD.png 2nd my SDD http://i692.photobucket.com/albums/vv282/trungdtdev/SSD.png my SSD does have a problem ??? sr fo my bad english Link to comment Share on other sites More sharing options...
Wired Posted April 21, 2012 Share Posted April 21, 2012 Test with ATTO. Link to comment Share on other sites More sharing options...
Toasted Posted April 22, 2012 Share Posted April 22, 2012 If your ATTO results turn out low, you would secure erase the SSD and reinstall Windows. If your SSD isn't having stability issues, You don't need to update the firmware. Link to comment Share on other sites More sharing options...
trungdtdev Posted April 22, 2012 Author Share Posted April 22, 2012 This result test with ATTO http://i692.photobucket.com/albums/vv282/trungdtdev/SSD-ATTO2.png SLOW :(( Link to comment Share on other sites More sharing options...
Toasted Posted April 23, 2012 Share Posted April 23, 2012 Did you do a ATTO benchmark when you first got it? What chipset does it have? is it speed limited by Toshiba? Link to comment Share on other sites More sharing options...
trungdtdev Posted April 23, 2012 Author Share Posted April 23, 2012 i try secure erase but Can't boot with Parted Magic from CD or DVD (Can you recommend other soft for erase ssd disk ?) My laptop Qosmio X505-Q870 Chiset : Intel® Core i7 CPU Q720 @1.60GHz VGA : NVIDIA GeForce GTS 360M sr for my bad english Link to comment Share on other sites More sharing options...
Toasted Posted April 24, 2012 Share Posted April 24, 2012 You can try make a bootable USB and put Parted Magic on it. Link to comment Share on other sites More sharing options...
trungdtdev Posted April 25, 2012 Author Share Posted April 25, 2012 Ok i Secure Erase success but update firmware still no drivers found ! Link to comment Share on other sites More sharing options...
Synbios Posted April 25, 2012 Share Posted April 25, 2012 Please right click the utility and run as administrator, regardless if your account has administrative privileges or not. Link to comment Share on other sites More sharing options...
trungdtdev Posted April 25, 2012 Author Share Posted April 25, 2012 my account is administrators ! run as administrator still proplem I think there is an app conflict . Link to comment Share on other sites More sharing options...
Toasted Posted April 25, 2012 Share Posted April 25, 2012 It probably doesn't support or detect the laptop's chipset, Which may cause it to find no drives. Link to comment Share on other sites More sharing options...
chy1013m1 Posted April 27, 2012 Share Posted April 27, 2012 I am having the similar problem, except for the updater sees my drive but reports the firmware for my drive is not in the 2.4 package. My drive is attached to ICH10 port and is also not the primary windows drive. help ? http://s18.postimage.org/jwflm4b7t/corsair_weird.jpg Link to comment Share on other sites More sharing options...
deity Posted April 27, 2012 Share Posted April 27, 2012 I am having the similar problem, except for the updater sees my drive but reports the firmware for my drive is not in the 2.4 package. My drive is attached to ICH10 port and is also not the primary windows drive. help ? http://s18.postimage.org/jwflm4b7t/corsair_weird.jpg only alternate package can help ( present in 2.0 pack and absent in 2.4) Link to comment Share on other sites More sharing options...
Synthohol Posted April 27, 2012 Share Posted April 27, 2012 to the OP, try the update in IDE mode not AHCI. worth a shot? Link to comment Share on other sites More sharing options...
Synbios Posted April 27, 2012 Share Posted April 27, 2012 Are you using Intel RST or windows AHCI drivers? Link to comment Share on other sites More sharing options...
trungdtdev Posted April 28, 2012 Author Share Posted April 28, 2012 Are you using Intel RST or windows AHCI drivers? My Drivers http://i692.photobucket.com/albums/vv282/trungdtdev/ControllerAHCI.png Link to comment Share on other sites More sharing options...
Synbios Posted May 1, 2012 Share Posted May 1, 2012 It looks like you're using Intel drivers. Sometimes the utility has problems while flashing firmware on 10.x series Intel drivers. You should manually roll back to 9.x or Microsoft drivers to do the flash. I am 99% sure that is the problem. If you uninstall the device, you might be able to install the Microsoft drivers. If that sounds too risky to your, try downloading the 9.x Intel drivers and install that instead.I find it very strange that your roll back driver button is disabled, did you install this copy of windows yourself? I'm assuming if you did, or whoever did, they F6'd the Intel drivers. Regardless, this goes unsaid but please exercise caution while doing this. Backup all your data and have a recovery disc handy! Link to comment Share on other sites More sharing options...
frumpsnake Posted May 2, 2012 Share Posted May 2, 2012 I'm having the exact same problem flashing my F120. (Windows 7 x64, ICH10 using Intel RST 9.2) What I find most interesting is that a competitor's SF-1200 device *is* picked up by the Corsair flashing utility, so I'm not convinced it has *anything* to do with the chipset or drivers involved. It also doesn't show up in a bootable Win7PE 32-bit environment which is using MS standard AHCI drivers. I'm going to assume I have to wipe my SSD entirely. Link to comment Share on other sites More sharing options...
trungdtdev Posted May 2, 2012 Author Share Posted May 2, 2012 It looks like you're using Intel drivers. Sometimes the utility has problems while flashing firmware on 10.x series Intel drivers. You should manually roll back to 9.x or Microsoft drivers to do the flash. I am 99% sure that is the problem. If you uninstall the device, you might be able to install the Microsoft drivers. If that sounds too risky to your, try downloading the 9.x Intel drivers and install that instead.I find it very strange that your roll back driver button is disabled, did you install this copy of windows yourself? I'm assuming if you did, or whoever did, they F6'd the Intel drivers. Regardless, this goes unsaid but please exercise caution while doing this. Backup all your data and have a recovery disc handy! I update Firmware with Intel RST v9.6.0.1024 not successful so i update new version but still error. Link to comment Share on other sites More sharing options...
Synbios Posted May 2, 2012 Share Posted May 2, 2012 I'm having the exact same problem flashing my F120. (Windows 7 x64, ICH10 using Intel RST 9.2) What I find most interesting is that a competitor's SF-1200 device *is* picked up by the Corsair flashing utility, so I'm not convinced it has *anything* to do with the chipset or drivers involved. It also doesn't show up in a bootable Win7PE 32-bit environment which is using MS standard AHCI drivers. I'm going to assume I have to wipe my SSD entirely. In that case you sound right. I haven't seen this problem before. I know for sure, after speaking with people from the competitor, that they also had a problem with SF-1200 devices getting recognized with RST 10.x. However if you're using RST 9.x, then obviously that is not the problem. I don't know what it is in your case. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.