-
Posts
56 -
Joined
-
Days Won
1
DarkCrazy last won the day on June 13 2020
DarkCrazy had the most liked content!
Reputation
18 GoodAbout DarkCrazy
- Birthday 01/22/1982
Recent Profile Visitors
-
Corsair iCue link Problème surintensité du capteur
DarkCrazy replied to Revenrek's topic in Aide Composants PC
Bonjour, connectez seulement 5 ventilateurs avec la pompe. Vous n'obtiendrez pas cette erreur, je pense. J'ai un 18qx et une pompe. 6 ventilateurs et la pompe obtiennent toujours l'erreur. Chaque port a un maximum de 7 composants mais la pompe à lcd prend 2 composants, je ne comprends pas pourquoi. Donc avec 5 ventilateurs et une pompe, il n'y a pas de problème. -
Overcurrent ports Corsair Link Hub
DarkCrazy replied to Tirkam's topic in Build Hardware Troubleshooting
Hello, connect only 5 fans together with the pump. You will not get this error, I think. I have an 18qx and a pump. 6 fans and pump always gives the error. -
DarkCrazy started following Corsair Travis
-
1700 bracket won't slide into XC7 RGB Elite LCD
DarkCrazy replied to Loss Mentality's topic in Build Hardware Troubleshooting
With a little bit of force, it will fit perfectly, I think you were afraid that it would break. I had no problem for lga1700.- 7 replies
-
- xc7
- intel 1700
-
(and 2 more)
Tagged with:
-
Corsair iCue link Problème surintensité du capteur
DarkCrazy replied to Revenrek's topic in Aide Composants PC
Regardez la règle des 7 composants maximum pour un port. Je pense qu'il y a plus de 7 composants par port. 7 ventilateurs pour 1 port fonctionneront bien, mais 6 ventilateurs et 1 pompe pour 1 port poseront des problèmes. Vérifiez votre installation. -
There is a maximum of 60cm cable, if you have electronic knowledge, you should cut the cable into 2 and add cable between them yourself. I cannot think of another alternative.
-
Look, you are a little right about this. I bought qx120 the other day, 8 pieces, 6 of them were 135mm cables and 2 of them were not, so I contacted them by mail. I said 2 cables were missing and they said they would send me 2 cables and as a result they sent me connectors 🙈😂😂 there is a customer representative who does not know what a cable or connector is, I was really surprised.
-
Even though they know that it is a chronic problem, they send ax1200 and ax1200 over and over again and they make the user suffer. During the time I kept it on the shelf, the warranty expired and I needed it one day, but when it broke down within 2 months, I saw that the warranty was over. Travis gave a different exchange suggestion, but I could not send it due to my workload. I reached last week and a different customer support told me that there would be no exchange. As you said, it leaves a bit of a bad taste in the mouth about the Psu. I have never had a problem with other products, and if I have, they have fast and precise solutions.
-
I had the same problem. The spare ax1200i sent by RMA broke down within 2 or 3 months. By this time the warranty had already expired. I explained the issue to Travis on Reddit, and he suggested a replacement, but since I am sometimes delayed in sending due to problems, I tried to reach him again last week, and Corsair employees insisted that the warranty was over and did not offer a replacement or alternative solution. Ax1200 and ax1200i know that they have a chronic problem, but the solution is zero. We have no choice but to throw it in the trash!!
-
iCue Link Hubs connect 7 units for each output and sit back 👍
-
Addressing Red Blinking Concerns with iCUE Link
DarkCrazy replied to Corsair Mars's topic in Build Hardware Troubleshooting
Hello, can you find a software solution in this topic in the next update ? -
How to control 20 components with iCUE Link.
DarkCrazy replied to DarkCrazy's topic in Hydro X Custom Cooling
HI, @LeDoyen, @DevBiker Thank you for your answers. I don't want to deal with the fan curve. There will be no need to adjust the fan curve with a software edit. ecosystem but a simple problem. Corsair will handle this.. -
XC7 Elite Clearance RAM / Heatsink Mainboard
DarkCrazy replied to Gasalon's topic in Hydro X Custom Cooling
-
DarkCrazy started following How to control 20 components with iCUE Link.
-
Hello, I have a small problem I'm building a system with 2x icue link hub + 18x QX120 fan + 1x XD5 elite lcd + 1x XG7 RGB. there are a total of 20 components and I used 2x icue link hubs but I want all the fans to be LINK Hydro X so I want them to be synchronized in the same way. I think it's a problem that can be fixed with software. 1 iCue Link Hub accepts a maximum of 14 components and does not use speed control according to the pump water temperature, even though 6 fans are in the system. Why doesn't the fan control option in the 1st picture come out automatically in the 2nd picture, is there a solution for this? If it is built, it will be a really great eco-system. Thank you. Note: I am going to order 1 fan missing from the pictures to have 18, For testing in installation
-
Asus rog strix rtx 3080 oc gundam version
DarkCrazy replied to DarkCrazy's topic in Hydro X Custom Cooling
-
Hi as if the heatsink pads are missing, is there any chance this is a mismatch? Hydro X Series XG7 RGB 30-SERIES STRIX GPU Water Block (3090, 3080, 3070) is compatible with ASUS ROG Strix GeForce RTX 3080 Gundam (ROG-STRIX-RTX3080-O10G-GUNDAM) graphic card.