- 261,119 Members
- 1,226,623 Posts
- 400 Online Now
Featured Posts
See all featured-
- 0
- 8
System Build InspirationStart Building with CORSAIR BUILD KITS
-
- 0
- 23
New Product ReleasesA Great Day for DIY – Introducing a Multitude of New Components
-
- 2
- 17
New Product ReleasesIntroducing the CORSAIR RMx SHIFT Series™ 80 PLUS Gold Fully Modular ATX Power Supplies
-
- 1
- 7
New Product ReleasesIntroducing the CORSAIR TC100 RELAXED Gaming Chair
-
- 0
- 1
New Product ReleasesLaunching the CORSAIR XENEON FLEX 45WQHD240 45-Inch OLED (3440x1440), 240Hz, Bendable UltraWide Gaming Display
Trending
Go to the forums-
Corsair iCUE LINK QX120/140 Starter Kits
Lamp_Shade replied:
Thanks so much for your help.
By Lamp_Shade
Started6 -
ICUE LINK XG3 RGB HYBRID and iCUE LINK H150i LCD
Dyne Reardon replied:
Thank you!
By Dyne Reardon
Started2 -
What is Corsair doing in terms of sustainability?
Moty replied:
Thank you very much @Technobeard😄
By Moty
Started2 -
CPU Cooler Error
muvo replied:
I would say that the pump is not working. That's why you get the error message in the BIOS and you don't have a cooled CPU. check whether you have plugged in the power supply correctly.
By bbillilovell
Started1 -
Can we please get "Rainbow Channel" setting in Hardware Mode, and Device Memory Mode?
skygunner27 replied:
bump.....bump bump!!!
By skygunner27
Started1 -
iCue 5 and New K70 MAX
c-attack replied:
You can’t transfer a profile from software to hardware mode (now DM mode) or vice versa. Each mode has its own specific rules with hardware profile rules being both model and operationally specific. You always will have lower capabilities in hardware mode. Presumably the lighting isn’t that complicated. For hardware assignments, you just have dig in and do them again. There are some restrictions since you need the software to execute some actions. Once you’ve done one HW profile, those assignments can be copied to the Hardware Library and pasted to other HW profiles. If you have complex macros, you might be able to Windows cut and paste them over. KBs always required an active save, but now all devices do as well. The little SD card below the toggle switch is the save button. The new Device Memory Mode has a toggle state switch. Once you put it into DMM mode, you must toggle it back out to return normal functionality unlike the old system where leaving the tab auto-saved and returned you to a normal state. This is going to cause some issues as people learn to adjust to the new system.
By les_garten
Started1
