Bhaalspawn Posted March 4, 2020 Share Posted March 4, 2020 i have 2 questions about LS100 1- i would like to use these together with 1 fan. If i buy a starter kit can i connect a single QL 120 to the commander(s) included? 2- is it possibile to create and effect that spread the ligh from the center of the strip toward the edges? (and the opposite) Link to comment Share on other sites More sharing options...
DevBiker Posted March 4, 2020 Share Posted March 4, 2020 Fans will not connect directly to the LS100 and you cannot configure the LS100 for fans. The built in audio effect will go from the center out but I'm not sure if you can do that with custom effects. Link to comment Share on other sites More sharing options...
Bhaalspawn Posted March 4, 2020 Author Share Posted March 4, 2020 so i need different hubs/commanders if i want to have both the LS and the fans in the PC? Link to comment Share on other sites More sharing options...
DevBiker Posted March 4, 2020 Share Posted March 4, 2020 so i need different hubs/commanders if i want to have both the LS and the fans in the PC? Yes, you'd need a traditional fan setup - Lighting Node Pro/Commander Pro + RGB Fan LED Hub or Lighting Node Core. See the RGB FAQ in my signature. Link to comment Share on other sites More sharing options...
Bhaalspawn Posted April 10, 2020 Author Share Posted April 10, 2020 ok i saw that LS100 is fully external and it connects to PC by external USB port, ok. Is is possible to bend the strips to 90 degrees? I don't want to put them on the back of the monitor but on my desk and i need to bent them. What would it be the radius of the bending? I don't expect them to be bent like the other ones on the market (can i say the name??) that has a very short radius thanks to small adapaters inclueded but i need a radius or max 3-4 cm, not more Link to comment Share on other sites More sharing options...
Recommended Posts