davidcrofter Posted September 20, 2011 Share Posted September 20, 2011 Hiya, I am looking to see if the Thermalright Archon CPU Heatsink will fit in this case - what is the maximum height of cooler the case can take?? The height of the Archon is 170mm btw - which I believe would fit in the 650D/600T.:D: Link to comment Share on other sites More sharing options...
-rk- Posted September 21, 2011 Share Posted September 21, 2011 Hi, the case 600T has a width from 265 mm. The 650D has a width from 229 mm. The fan is 170 mm. Hope, that helps. -rk- Link to comment Share on other sites More sharing options...
davidcrofter Posted September 22, 2011 Author Share Posted September 22, 2011 Hi, the case 600T has a width from 265 mm. The 650D has a width from 229 mm. The fan is 170 mm. Hope, that helps. -rk- Thanks but I am looking to see if the Thermalright Archon will fit in a Corsair Carbide 500R.:biggrin: Link to comment Share on other sites More sharing options...
-rk- Posted September 22, 2011 Share Posted September 22, 2011 Hi, the 500R: 20.5” x 8.1” x 20”. 1 Zoll = 2,54 cm. -rk- Link to comment Share on other sites More sharing options...
antonbrk Posted September 29, 2011 Share Posted September 29, 2011 Hi, the 500R: 20.5” x 8.1” x 20”. 1 Zoll = 2,54 cm. -rk- But what is inset distance of the mobo on the 500R? 8.1"= 205.7mm - 170mm (Archon height)= 35.7mm = 1.4". 1.4" - ??? = ??? Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted September 30, 2011 Corsair Employee Share Posted September 30, 2011 You will have about 5.5" of clearance depending on the MB you use but that should be about right for most Link to comment Share on other sites More sharing options...
antonbrk Posted October 7, 2011 Share Posted October 7, 2011 You will have about 5.5" of clearance depending on the MB you use but that should be about right for most Much thanks! Link to comment Share on other sites More sharing options...
antonbrk Posted October 7, 2011 Share Posted October 7, 2011 Then, at 170mm (6.69"), the unusually tall Archon will not quite fit in the 500R. I assume that 5.5" of clearance includes the extra space created by the side panel flaring. That is what I was uncertain about because the listed case width is 8.11", and, visually, the expanded side panels make the case look wider than that. Much thanks for your reply. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.