KillerDude6282 Posted March 7, 2020 Share Posted March 7, 2020 When i try to pm Chris it wont let me, i need the files for the yellow version of the se wireless headset. ive been scrolling for hours to even find a code... and you cant pm chris anymore. I NEED HELP Link to comment Share on other sites More sharing options...
LeberAdanek Posted March 19, 2020 Share Posted March 19, 2020 I very much appreciate this guide. I thought I'd busted them. A life saver. Thank you very much. Link to comment Share on other sites More sharing options...
Neilbarber69 Posted April 12, 2020 Share Posted April 12, 2020 HI my void wireless have been working perfectly for the past 5 years then yesterday it said the battery was low. i plugged it into charge but there was no charging light or any other lights. ive tried new cable different usb ports with no luck. ive replaced the battery as it wasn't holding charge very well but still not working. if i start up the latest version of your software its there but not connected. ive tried the steps on the forum but it cant detect the headset through the USB. ive also put tester on the battery and surrounding terminals and it has power but wont turn on. what else could i try as i really dont want to toss them. Link to comment Share on other sites More sharing options...
XIII1626866468 Posted April 27, 2020 Share Posted April 27, 2020 hi, well this is my issue i forgot to charge my corsair void pro rgb and it got shut down , so i did out it in charge but after that i got nothing the headset refuses to connect at all i tried all the different methods , i had this issue before and i fixed it with the paper clip method and took me 3 hours for that now i've been trying to solve this issue for like 4 days and it keeps refusing to , i tried flashing the firmware , tried the paper clip solution , charged the headset till the green light appeared ive literally done them all but there's nothing happening ... i even contacted the support but no one responded since 4 days .. is there anything i can do ? about the paper clip method i've done it right i press on the dongle till it starts flashing rapidly then i press down the power button on the headset till the light turns flashing red ,i did wait and kept pressing for hours nothing happens .. please i need some help ! Link to comment Share on other sites More sharing options...
dscheppi Posted May 25, 2020 Share Posted May 25, 2020 Dear users / chris, I have had issues with my corsair void wireless for ages. I read a lot about boatloader mode now and that a person named chris has files to solve this. Also there is something about an update. However If I want to update the firmware i cant because my pc does gives an error about the usb device. This has been the case since i got this item. The reset using mute does not work (it did in the past 1x). I also got the latest icue application. For a plug and play device this is a bit of a drama imo. Could anyone help me out cause i am going nuts over this and have no idea how to solve it once and for all Link to comment Share on other sites More sharing options...
oguner Posted December 31, 2020 Share Posted December 31, 2020 I waited until it finished charging. I pressed the mute button for 20 sec while it was off. I pressed the power button as well, but it does not turn on. Where am I making a mistake? Link to comment Share on other sites More sharing options...
Wxserr Posted January 12, 2021 Share Posted January 12, 2021 @Corsair Chris / anyone When I connect the wireless dongle to my PC it appears as "Avnera AV 6301" in printers and devices, and in the CUE software my headset appears as "Generic Headset", and it says "connect a usb cable to the headset to update them" but my pc doesnt recognise the hadphones when connected. Idk if it is in bootloader mode, please help! Link to comment Share on other sites More sharing options...
TheGlender Posted April 6, 2021 Share Posted April 6, 2021 I also have the same issue with my Void RGB Elite Wireless headset. The wireless dongle shows up correctly, however the headset shows up as an Avnera AV6302 and will not turn on. Help! Link to comment Share on other sites More sharing options...
Sodah Posted November 20, 2021 Share Posted November 20, 2021 I have come from the future. After seeing this issue and going around out of sheer luck I might have found out what to do, so am going to try my best to explain… Note: I did this with a void wireless. 1. Do everything that you would normally do, go to settings, update, force update, and connect your headset using usb. Now if you are in my shoes it will say connect headset despite the headset being connected. 2. Keep your headset plugged in, and this is when you hold the mute button while you are currently on the screen. Problem was many were saying hold the mute button b4 this part. 3. It should start updating. I am using the most current version of iCue as of 11-19-2021. Link to comment Share on other sites More sharing options...
Writtenlifee Posted February 24, 2022 Share Posted February 24, 2022 So, recently i got my headset from warrenty, because the plug in jack was so loose. I was using my headset and then suddenly it cut out, and i tried turning it on and no luck, anyhelp? Link to comment Share on other sites More sharing options...
user12345 Posted April 3 Share Posted April 3 On 10/9/2015 at 2:44 PM, Corsair Chris said: Yep, that's bootloader mode. PM me with your email address and I'll send you instructions to fix it. Sorry to necro this thread but I'm having the same issue and it doesn't register in icue says not connect. How do I fix? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now