Choco_Tacos Posted October 22, 2020 Share Posted October 22, 2020 (edited) Hello, today I installed a 4tb SSD as a secondary hard drive to store my games and now RGB lighting is not coming from any of my fans. The weird thing is my lighting strips are still working. The fans are on and working. I've tried a new profile, I can control fan speeds, replugged everything from the commander pro, updated the icue software, checked icue program and it sees the commander pro and my fans. So I'm at a loss on what to do. Any advice would be greatly apricated. I have a H115i AIO 3 LL120s(2 top for exhaust, 1 on back for exhaust) 3QL120s(installed in front with AIO) 3 Corsair RGB LED Lighting strips My set up for lighting is- Corsair Commander pro RGB Fan LED Hub 3 QLs plugged into 1,2,3 on RGB Fan LED Hub 3 LLs plugged into 4,5,6 on RGB Fan LED Hub ---RGB Fan LED Hub plugged into Commander pro Lighting Channel 1 ---3 corsair rgb led strips connected and plugged into Commander Pro Lighting Channel 2 Edited October 22, 2020 by Choco_Tacos Link to comment Share on other sites More sharing options...
DevBiker Posted October 22, 2020 Share Posted October 22, 2020 Do you have a Lighting Node Cor or RGB Fan LED Hub? The LNC connects via USB, not via a Commander Pro lighting channel. Assuming that it is a Fan Hub and connected to the CP channel 1, do you have the channel configured in iCUE? Link to comment Share on other sites More sharing options...
Choco_Tacos Posted October 22, 2020 Author Share Posted October 22, 2020 I think you're right. It's the RGB Fan LED Hub. It's been a long time since I looked it. For setup I have lighting channel 1: QL fans---6 fans connected Link to comment Share on other sites More sharing options...
Recommended Posts