Taminator

I have exactly the same set but used here. However I've got 4 QL in one hub and 4 LL in the other. Com Pro sees the two but I need to set each one separately. Anyone have an answer (ec ept buying 4 more QL... Nearly bankrupt as it is

/Tam bows to c-attack. I have a deepcool cooler and it plugged into the rgb header just fine. We have almost identical main boards. I just assumed it was a standard fitting. Not like corsair to have their own wee special plugs just compatable with other corsair lol. It's a real pain that cos it's essentially cost me two systems to get anywhere near what I intended. Got those (5 rgb deepcool pack), Silverstone controller and now other redundant equipment last year but they're binned compared to the LL QL range. It's a minefield to be sure

@ devilsaces. Personally, after weeks of digging, I would plug the AIO into an rgb header on your main board. I assume that's what you have at present and control with aura? From what I understand each series of fans requires different voltages and things I know not what so plugging different types into the same hub seems to be a very bad idea (see some of the threads in this section.... One poor guy blew up several LL and QL doing just that). Then push on with the QL"s and copro etc. Install both aura and icue and then there is a.dll/plug in l that I finally found on Asus (plugin goes to a folder in icue) that allows control of both rgb headers (I have the z390 f that has 2, not sure but you'll have at least one) plus the memory slots, video card etc should you have rgb lighting there too from icue So basically I set one colour/pattern and all fans, asus 2070 card, memory and the main board itself all lights up the same. Sweet. If you need the link to asus for that plug in let me know (I'm on my fone and the link will be on the history of computer browser).

Sorry for that daft youtube video... Wasn't the one I intended.

Thankyou c-attack. I know it's doable now as discussed but I'm doubting the ability to sync both rgb controllers having used the icue interface somewhat at this point. For instance running a loop or something. So I've changed my mind. The LL120 are spanking new so I can sell them on ebay (maybe even get a return from amazon) and just make the whole pesky thing QL's. And methinks ill just stick with the 6. Unless it is possible to sync two controllers... In fact that's a good question. I'll search n see if any1 asked b4. If not I'll open a separate thread. Thx for your assistance

So leave my 5 LL120 as is and get the 3 pack QL that comes with its own RGB hub and plugs into a USB port independant of the other hub or commander. Ique see's the two hubs and it seems to work. [ame] [/ame] Which is basically what you said. So that's what I'm goin for. Thanks very much for your assistance. There are horror stories out there regarding plugging LL and QL to the same hub and basically it seems kto blow the fans up.... All of them.

I think I just need some clarification here. I have 5 LL120 with the rgb hub and commander pro. All is well. However I want to add 3 QL120. Reading the threads here I'm a little confused. Is it the case I should *never mix/match (for instance plugging one of the QL's into the spare rgb port I have). Or (and I need one anyway) get another rgb hub and that will slot nicely into the second rgb port on the Pro. All QL's in one rgb hub all LL in the other. Have I got that right?