Kir4

Nothing, everything stays dark :(: Edit. My GF has the same case. We tried her hub - everything works. New Hub it is then. Sorry for wasting your time.

Hey here. I have a Corsair 680X Case. Was working fine until today. Now the 3 Front Fans are not lighting up anymore. Lightning Node Pro is still present in iCue so I guess it's still fine. So either the RGB Hub or one of the Fans is dead RGB wise (they are still spinning) Any Ideas what to do? The Case is new. Edit: When I replug the Fans @ the RGB Hub it works for a few minutes but after that everything is dead again. RGB Hub broken?

Guess what. I've replaced the broken unit for another one. Now the RGB on the Fans isn't working - tinkering with FW Update and iCue Settings brought me nowhere. So 2nd one is defective as well. I'am gonna give it one more try. If that doesn't work I'll need to look for another AIO Solution.

Tried that also. Fan Channel #1 doesn't care at all.

Hey there. I applied the Fan Curve to both fans. One is responding the other one doesn't care at all and just blasts away at 2600RPM. I already tried switching the fans and reconnecting everything. If I switch the other one goes all out on me so it's definitely the fan connector coming from the pump head that's not working correctly. TBH I'am fine now as it's working but it's still a "broken" Product so I'll probably return it for another unit.

Update. I've connected the Pump directly to the the AIO Pump Header on my Mobo and the 2 Fans to CPU and CPU_OPT. It's working fine now. I can still change colors and stuff in iCue but ofc I can't see or set RPM on the Fans as my BIOS is handling it rn. So it looks like the Fan Control coming from the Pump Header is broken. Is it ok to run the setup like this (It's working for now) or should I replace it with another unit? Thanks.

Hey there. After I had a TT AIO I decided to upgrade to a more colorful Version. Today I bought the H100i RGB Platinum. What I noticed first was the sound level. It's super loud. After some checking and tinkering I've found out that FAN #1 always runs at ~2650 RPM while Temperature is around 28 Degrees (Even though HwInfo says smth around 34) No matter which Profile I apply or what I change the Fan always runs at max Speed while Fan #2 obliges my commands and changes according to the selected profile. Is there anything I miss or is my AIO Broken and I need to get replacement? Thanks.