chidy

Is there a way to use dual bar under hardware screen? Dual bar only works when I have icue open.

I don't have any other rgb software installed. Just Icue. I've done a icue uninstall and reinstall. That didn't fix it. I than formatted my pc and it didn't help either. I doubled checked all my connections from the commander core and the lcd module and they appear to be plugged in properly. I think the issue is a firmware update that I updated from icue because before the firmware update it was working fine.

I purchased the lcd kit for my capellix cooler. I’m having an issue regarding the ring color. In icue I have hardware lighting set to static blue and a gif on hardware screen. My issue is when I exit icue the ring color on the lcd turns red. I don’t have red set onto the lcd anywhere in icue. Deos red ring mean I have an issue with the lcd kit? I’ve upgraded the commander core to the latest firmware available. thanks

Thanks your the response. It appears only custom curves work on the commander core. Tried fixed rpm, and fixed percentage and didn’t work.

My commander core connected to capellix cooler won’t control fan speeds. I tried to reinstall Corsair icue and tried different versions. It refuses to change the fan speed. Tried 0 rpm and it says at 800rpm, tried extreme and stays at 800rpm. Any speed I change it to will stay at 800rpm. The fans I am using is Lian li SL120. Got 7 fans using 3 fan input on the commander core

Got it fixed by doing a firmware update on the h150i xt thanks

My h150i xt refuses to be detected by icue when it’s plugged in the USB . port on the commander pro. I tried both. The commander pro is detected on icue. I plugged the h150 directly to the motherboard and it got detected in icue. Not sure what’s going on. I had a h100i before and it got detected on icue through commander pro. Any solution greatly appreciated. Thank you ryzen 3700x 32gb Corsair rgb pro x470 vii wifi 2tb samsung nvme strix 1080ti 750 watt g5

Thanks for the response!

Hi I’m trying to find out if it’s safe to use magnets behind my motherboard tray . I’ve attached magnets to the back of the commander pro and rgb hub and stuck them behind the motherboard tray on the evolv x where the ssd trays usually are and wanted to know if it is safe or not. Thanks

Do you have the latest version of Aura? Latest is 1.07.71. After you install the plugin go to Aura and click the refresh button and it should find your ram. Icue needs to be opened in order for Aura to control your RGB PRO

Only have the msi afterburner open at the same time

The performance tab under commander pro keeps disappearing way too often. I am running the latest version of icue. I have 6 LL120 fans connected to the commander pro. When the performance tab disappears so do my fans and the rpm speed. Sometimes restarting my pc fixes the issues or forcing an update on commander pro in Icue. I have attached a couple photos of the issue.

OK I will try that. Thank you

I seem to have figured it out. I unplugged the sata power and all the thermistors and reconnected everything back. Doesn't rev up on boot anymore

I've done what you suggested and my fans still rev up on startup. Made a custom fan curve and set it to the thermistor sensor #2 above the gpu. Could it have something to do with my bios?

is it possible to set two static colors to the LL120 fans? 1 color on the outer ring and one on the inner ring.

Quick question. How would I get the thermistors to stick into place? Is electrical tape ok?

Many thanks for your help. Take care

Thanks for that step by step guide. Got any suggestions on where to place the thermistors? I’ve got a Corsair 570x case with a h150i pro mounted to the front

Thanks for the response. Was close to buying a new commander pro. How would I get my custom fan curve written to the device?

hey all I've got 6 ML120 Pro RGB fans connected to rgb hub and from the hub to the commander pro. I've set them all to 4 pin in icue and are set to quiet mode. All fans rev up to max speed on startup. Also 3 of the fans don't start spinning until the windows splash screen. Could my commander pro be defective? Does anyone have a clue on why it does this? Any help is greatly appreciated Ryzen 1600x Strix x370-F Corsair Vengeance RGB Pro 16gb 3200mhz Strix 1080 ti Evga 750 g3 960 evo 256gb WD black 6tb