Ali-S

It's already added now

Well, the 5000D comes with a PWM hub with 6 fan connectors, which will solve the PWM issue which i can connect it to Commander core, And if it's ok if ICUE does not detect all the LEDs as you mentioned, I'll create a profile for them like I did before, but for the RGB, can I at least use 10 fans with the Commander Core? Which 192 LED total.

Hi, I am going to buy the 5000D and 3 more ARGB fans, and I already have the H150 Elite with LCD and 3 ARGB fans connected with a 3rd party cable for ICUE RGB control. But my question is, is Commander Core's specs is the same as Commander Core XT? because it can handle 264 LEDs. Because if I get 6 ARGB fans (24 LED per fan) connected with 2 ARGB spliters and 2 PWM spliters with 3 AIO fans (8 LED per fan) + LCD (25 LED), will this be an overkill for 193 LED, will it damage it?

No update regarding this? Image/Screen Rotation We encountered performance-related issues during our first attempt at implementing this via firmware during development. We are approaching the problem differently and addressing it via software. Status: In Development Release Timeframe: July 2022 iCUE Release 4.26.110

What does this firmware update do?

Searching for Windows Features and re-enable .NET Framework 3.5 and press on the "+" sign and select both Windows Communication Foundation HTTP and NonHTTP

Replied to the ticket with the file dump.

There is a workaround to fix this issue, after updating the windows you need to re-enable .NET Framework 3.5 and the Windows Communication Foundation, here are the steps: Open Command Prompt (run as administrator) and running the following commands: dism /online /enable-feature /featurename:netfx3 /all dism /online /enable-feature /featurename:WCF-HTTP-Activation dism /online /enable-feature /featurename:WCF-NonHTTP-Activation Or By searching for Windows Features and re-enable .NET Framework 3.5 and press on the "+" sign and select both Windows Communication Foundation HTTP and NonHTTP

That's a different issue, mine is the services issue like ICUE

Latest version v4.23.137 and i tried to do clean install by removing every corsair folder from C drive and regedit but didn't help While installing ICUE it will stop at 77% since it's trying to start Corsair service but it failed and i get this error: Service 'Corsair Service' (CorsairService) failed to start. Verify that you have sufficient privileges to start system services. But after i uninstalled Windows update everything worked as normal again.

Hello everyone, Today I updated my PC to May 10, 2022—KB5013943 and the update went smoothly but after the restart, I found the Corsair ICUE app was not working well not showing temps and kept getting notification errors in ICUE. I checked it and the Corsair service is not working at all I tried to restart the service and start it manually didn't work and got this error: and here is the troubleshooting I did: sfc /scannow DISM /Online /Cleanup-Image /RestoreHealth Creating ServicesPipeTimeout in regedit Tried to install the Corsair ICUE again (installation will stop at 77%) Finally, I managed to make it work again by uninstalling KB5013943 from my PC and the app and other services worked again.

The same exact issue here, after Windows 11 startup ICUE crashes and I need to start it manually.

For the people who had issues with the red triangle or screen settings not showing in ICUE the fix is still at Mid-March 2022 -> April 15, 2022, so any update released before that and not mentioned in the release notes means it's not yet fixed.

I don't think that last update 4.21.173 fixed this issue yet, but you can run the LCD with external USB that will solve the issue for now.

That's great I'll update to this version and test it out, but I would like to speak about an issue that I hear like USB discount and reconnect sound and when I look to the LCD I see it restart, not sure the cause of this issue but I did a clean install for the ICUE but still facing the same issue from time to time. Edit: Using Windows 11 Build 22000.527

For unknown reason i installed MSI Center back and it started working normally now, not sure why that happened

Here is a video showing even after desktop lock it will do the same

So today I had a power outage which was normal but after the power came back after10 mins, i turned on my PC, and when I try to launch ICUE software it takes time to launch, I mean the software on my screen but not responding inside the task manager and after 2-3 mins the software works normally again. I tried to reinstall and delete the files from %appdata% and %localappdata% folder and removed the files from Regedit and removed MSI software which was installed before without any issues but still, the ICUE software takes 2-3 mins to work and function normally, the ICUE v4.19.191 installed in Samsung 970 EVO Plus, so I don't think it's hard to drive issue. Does anyone have a solution for it?

Anyone knows a fix for random RGB flicker for H150i Elite? It happens randomly for like every 2-3 hours it flickers for 1 sec.

Yes, i already adjusted lighting effect and hardware lighting, but i found out if i closed ICUE and open it again it reset the hardware lighting. I already removed it completly from my system and installed it again and updated to v4.13.226 and still reseting after closing the app or restarting the PC. and i found another issue my H150i Elite the lighting flickers from time to time for split second not sure why it do that. and there's any way to run the fan curve like on quite on windows lock screen? since the fans rpm ramps up very quickly and loudly.

Why my hardware light keep reseting to spiral rainbow? everytime i choose Arc it reset to spiral rainbow on windows restart and how to force lighting effect or keep ICUE running with fan curve on windows lock screen? I am using Corsair H150i Elite Capellix