Jump to content
Corsair Logo Corsair Logo
Corsair Community
CORSAIR COMMUNITY Survey, we want to hear your feedback!

danoz0r

Members
 View Profile  See their activity

  • Posts

    26

  • Joined

 Content Type 

Everything posted by danoz0r

  1. danoz0r
    I agree with Zotty on this. I went the extra mile of purchasing AX1600i because I thought it would solve the 5v. My fault for not doing proper research on it tho. All lighting on my peripherals and 32 QL's need to be reduced to 25% to get Zero RPM.
  2. danoz0r
    http://i.imgur.com/WUYRRS1l.jpg 32 QL fans 1 copro 2 nopro 8 RGB Fan LED hubs 2 Hydro X blocks 2 Hydro X pumps 10 corsair RGB Strips keyboard mouse mouse mat streamdeck xl sata drives ram m.2's I'm running all the RGB lighting at 25% to keep PSU fan from not spinning. We need bigger 5v asap
  3. danoz0r
    Followed all steps, still no firmware. :(
  4. danoz0r
    Wait what? doesn't show up for me.
  5. danoz0r
    My virtuoso SE cuts out for like 3 seconds when I play games/music once every 5-10 min or so . Anyone else have that problem?
  6. danoz0r
    yeah, same here.
  7. danoz0r
    These are my speeds on x570 godlike. Been same as since release. Thoughts?
  8. danoz0r
    I had the same issue. It's most likely due to a defect fan. I suggest you try find the particular fan(and/or the fan in front of that one) that is glitching and place it on the of the lighting hub and see if the glitch is at the end of the loop. I had to replace 7 fans in total. I have no idea why or how it happened. As I never pulled on any cable and they were all brand new.
  9. danoz0r
    I got the same problem. So deffo not isolated to Aorus
  10. danoz0r
    Whoooah.. this would have saved me from spray painting :) Looks awesome tho ^^
  11. danoz0r
    i9900K z390 Asus Maximus XI Formula Same problem as you guys. never over 4700mhz. Everything on auto accept xmp.
  12. danoz0r
    I'm using the same diagram as you. That's why I thought I should ask here first:) Yes, I am using Asus Aura to for motherboard and graphics cards.
  13. danoz0r
    Question to all of you guys. Do you guys experience rgb sync issues? f.ex suddenly rgb strips stay one color while rest works? For me, a restart fixes it, but still annoying. Thinking it could just be iCUE software issue
  14. danoz0r
    Thanks. Yes, it fits. Just haven't figured out what orientation I should put it. LEDs facing down, facing out, facing up. Going to try changing positions and see what I like best :)
  15. danoz0r
    Results after Spray painting and soldering strips together so the led gap isnt to big. https://imgur.com/a/qDVrXej
  16. danoz0r
    Cool. I need to do this. :) Luckily I got a Screwfix close by
  17. danoz0r
    Yupp, all those steps are taken. I'll contact support then. Thanks
  18. danoz0r
    Yes all 6 strips are added
  19. danoz0r
    I've wired it like the revised diagram. Think my IO must be defective. Its not even powering the led strips. IO leds work. but not synced.
  20. danoz0r
    Zotty. love your diagram. Made it a lot simpler. Think I'm doing something wrong tho. I mean everything powers up all lights etc. But still getting a bit unsynced on the upper left of the front IO. Which is weird. Commander pro 1000D LED 1 ---> 5 RGB Strips ---> Then Sail ---> Then to front IO. However, this is not in use. Which you mentioned was a passthrough. How would I use this? do I need to? https://imgur.com/a/JgkIy0a
  21. danoz0r
    I got myself H115i RGB Plat. And yes I got the USB disconnect sound all the time(every 2 mins). Returned it for a new one. Same prob. Then I thought check forums. it's just too much of a coincidence of it happing twice. No problems with static colours. However rainbow wave seems to trigger it.
×
×
  • Create New...