Jump to content
Corsair Community

Gigabyte GA-EP43-DS3 and 2x Corsair TWIN2X4096-6400C5


Recommended Posts

Hi everybody,


My current configuration is a Gigabyte GA-EP43-DS3 and a dual channel kit (2*2gb) of TWIN2X4096-6400C5 (pictured here http://imgur.com/wbLFU0O ).


What I would like to do is buy another similar kit (pictured here: http://imgur.com/gwI1eiM ) and use them both, for a total of 4*2GB = 8GB.


In my motherboard user's manual, in the memory chapter, there is a phrase written

When enabling Dual Channel mode with two or four memory modules, it is recommended that memory of the same capacity, brand, speed, and chips be used and installed in the same colored DDR2 sockets for optimum performance.

From this I get that the two kits should work ok, but as you can see in the pictures there are two different version (3.2 currently installed, 4.2 the one I want to buy).


What do you think, should there be any problems with it? Would I be able to run them at 800MHz? (I've read some other topics where people we're suggested to run 4-modules configurations at a lower frequency)




Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...