wemdee Posted October 23, 2012 Share Posted October 23, 2012 Just a FYI. When I installed the Link system, it used both of my USB 2.0 headers on my motherboard. One for the link commander and one for the ax1200i. I know that I could use the system link connector for the ax1200i and get one back, but I decided to look for another solution. After looking for awhile I ordered a PCI card with 2 USB 2.0 headers. I am going to send it back because the headers are only one row of pins (5 pin instead of 9/10 pin) and the regular header won't fit. Anyway, I finally found and ordered this. http://www.nzxt.com/new/products/case_accessories/iu01_usb_expansion Looks pretty good and doesn't need a PCI slot. I'll comment back once I get it installed. Just thought someone else may be facing the same issue. Link to comment Share on other sites More sharing options...
LazySoft Posted October 23, 2012 Share Posted October 23, 2012 I have one my self and it's working good. Have my CorsairLink Commander, a card reader and front USB3(just as USB2) port's on it. It work's like just a regular external USB hub, but with headers and ports. Link to comment Share on other sites More sharing options...
wemdee Posted October 23, 2012 Author Share Posted October 23, 2012 I have one my self and it's working good. Have my CorsairLink Commander, a card reader and front USB3(just as USB2) port's on it. It work's like just a regular external USB hub, but with headers and ports. Cool, thanks. :biggrin: Link to comment Share on other sites More sharing options...
GTXJackBauer Posted October 25, 2012 Share Posted October 25, 2012 Just a FYI. When I installed the Link system, it used both of my USB 2.0 headers on my motherboard. One for the link commander and one for the ax1200i. I know that I could use the system link connector for the ax1200i and get one back, but I decided to look for another solution. After looking for awhile I ordered a PCI card with 2 USB 2.0 headers. I am going to send it back because the headers are only one row of pins (5 pin instead of 9/10 pin) and the regular header won't fit. Anyway, I finally found and ordered this. http://www.nzxt.com/new/products/case_accessories/iu01_usb_expansion Looks pretty good and doesn't need a PCI slot. I'll comment back once I get it installed. Just thought someone else may be facing the same issue. Thanks for this post! I have no USB 2.0 headers left on the MB as this component is going to help me out alot and I could put my front interface of my 800D usb 3.0 finally to use and still have room for more usb headers. :D Link to comment Share on other sites More sharing options...
wemdee Posted October 25, 2012 Author Share Posted October 25, 2012 Thanks for this post! I have no USB 2.0 headers left on the MB as this component is going to help me out alot and I could put my front interface of my 800D usb 3.0 finally to use and still have room for more usb headers. :D Glad I could help. :sunglasse Link to comment Share on other sites More sharing options...
wemdee Posted November 11, 2012 Author Share Posted November 11, 2012 It took awhile to get the internal hub because I pre-ordered Halo4 and Amazon shipped them both in the same shipment. Anyway, just put the internal hub in and it works great. It has a Velcro mount, so I put it near the hard drive cages in the mid part of the case. I plugged everything in and it works great. Just in case anyone was wondering how it went. :biggrin: I've attached a picture if you are curious. To give an idea of size, the fan above it is a standard 120mm. Link to comment Share on other sites More sharing options...
wytnyt Posted November 12, 2012 Share Posted November 12, 2012 It took awhile to get the internal hub because I pre-ordered Halo4 and Amazon shipped them both in the same shipment. Anyway, just put the internal hub in and it works great. It has a Velcro mount, so I put it near the hard drive cages in the mid part of the case. I plugged everything in and it works great. Just in case anyone was wondering how it went. :biggrin: I've attached a picture if you are curious. To give an idea of size, the fan above it is a standard 120mm. looks like something i can use,thx for sharing Link to comment Share on other sites More sharing options...
wemdee Posted November 12, 2012 Author Share Posted November 12, 2012 looks like something i can use,thx for sharing Np, glad to help. :sunglasse Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.