cajenna Posted June 13, 2012 Share Posted June 13, 2012 Goomorning all,sorry for my bad english...i have a little problem with an force 3 ssd 120Gb,firmware 1.3.3,random i have some lag...the system hangs for a minute with the red led indicates the harddisk working fixed,and i can't do nothing,only move the mouse,after a minute the system start working again and i have no issue for all work session. I have try some test with hd tune: http://i45.tinypic.com/20tgiyq.jpg http://i48.tinypic.com/nlzy9w.jpg http://i48.tinypic.com/2hqvudc.jpg but i can't see any relevant problems. I have try to install another operative syste,windows8 release preview,but i have the same problem,and now i have a windows7 x64. My hardware configuration is: motherboard:M4A785TDV-EVO (asus) AMD Phenom II x2 560 @ x4 B60 (i have try also with cpu @ default) 2x4Gb DDR3 1333 Kingston optical drive lg sata the hdd is on ahci mode. Thankyou for help. Link to comment Share on other sites More sharing options...
Toasted Posted June 13, 2012 Share Posted June 13, 2012 Run a ATTO benchmark and post a screenshot Link to comment Share on other sites More sharing options...
cajenna Posted June 13, 2012 Author Share Posted June 13, 2012 Run a ATTO benchmark and post a screenshot Thanks for answer,here is the atto benchmark: http://i45.tinypic.com/2e3ud5h.jpg Link to comment Share on other sites More sharing options...
Toasted Posted June 13, 2012 Share Posted June 13, 2012 Latest BIOS? Try a different SATA port on the motherboard. Link to comment Share on other sites More sharing options...
cajenna Posted June 13, 2012 Author Share Posted June 13, 2012 Yes,the motherboard bios is the last-one,i will try another port. Thankyou. Link to comment Share on other sites More sharing options...
cajenna Posted June 13, 2012 Author Share Posted June 13, 2012 I have changed the port from sata1 to sata2,but there is another problem now,in the bios the device is set to ahci and the relative key in registry is set to 0,but the device is view like ide.... http://i49.tinypic.com/33zb8zs.jpg for the moment i have no freeze or lag. Link to comment Share on other sites More sharing options...
Toasted Posted June 14, 2012 Share Posted June 14, 2012 I see you have two Hds, The SSD and the Samsung HD. And in the picture i see, ATA Channel 0 and ATA Channel 1, The drives are still on SATA Controller. Link to comment Share on other sites More sharing options...
cajenna Posted June 14, 2012 Author Share Posted June 14, 2012 I have 3 hd,the ssd,one Samsung and one hitachi,are all on sata controller,now i have reinstall the o.s. (Windows 8 r.p.) and i have this situation: http://i45.tinypic.com/2myqk28.jpg Link to comment Share on other sites More sharing options...
Toasted Posted June 14, 2012 Share Posted June 14, 2012 See if you can find AMD Beta drivers for Windows 8 RP. Link to comment Share on other sites More sharing options...
cajenna Posted June 14, 2012 Author Share Posted June 14, 2012 See if you can find AMD Beta drivers for Windows 8 RP. I will try...thanks. Link to comment Share on other sites More sharing options...
cajenna Posted June 14, 2012 Author Share Posted June 14, 2012 I'm non able to find driver for Windows 8....i just install the driver for Windows 7 x64 and the actual configuration is this: http://i48.tinypic.com/2m7jiau.jpg Link to comment Share on other sites More sharing options...
Toasted Posted June 14, 2012 Share Posted June 14, 2012 If the HD is accessible and usable? If yes, I wouldn't worry much, but you are having problems, You might have to switch back to Windows 7 Link to comment Share on other sites More sharing options...
cajenna Posted June 14, 2012 Author Share Posted June 14, 2012 I'm writing under windows8,all the hdd are accessible and usable,i have no strange issue at this time,i hope solve the problem. Thanks a lot for support. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.