Fipz Posted September 24, 2011 Share Posted September 24, 2011 Danke für die Antwort :biggrin: SecureErase habe ich bis jetzt nicht gemacht. Das werde ich nachholen und dann so wies gemacht werden sollte Windows 7 neuinstallieren. Ich werde mich zurückmelden, obs erfolgreich war! (Allerdings frühestens 5. Oktober, vorher habe ich einfach keine Zeit dafür...) Bis dahin, keine BSODs :cool: [Das NB hat nur einen Slot und SSD hängt an Sata 0; brauche keine Partitionen] Link to comment Share on other sites More sharing options...
snowstorm Posted September 25, 2011 Share Posted September 25, 2011 Hallo, ich glaube ich bin von dem Problem seit heute ebenfalls betroffen. Die SSD lief in den letzten halben Jahr ohne Probleme und heute gab es beim Anmelden an Windows direkt einen "Freeze" (die HDD-LED leuchtete dabei ununterbrochen). Auch nach einem Neustart gab es wieder einen Freeze. Aber diesmal direkt Anmeldebildschirm. Nach 20 min. konnte ich weiterarbeiten. Sobald ich chkdsk starte friert die SSD nach 1-2 min. für immer ein. Dabei habe ich die SSD auch mal an einen anderen Rechner gehangen. Auch dort friert chkdsk samt der SSD ein (immer bei unterschiedlichen Fortschritt). Also mal PartedMagic von USB-Stick gestartet und SMART geprüft. Short- und Long-Test brachten keine Fehler, aber im Error Log konnte ich was finden. Was sagt ihr zu dieser Ausgabe: smartctl 5.41 2011-06-09 r3365 [i686-linux-3.0.0-pmagic] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: Corsair Performance3 SSD Serial Number: ENTFERNT LU WWN Device Id: 5 000000 000000000 Firmware Version: 1.0 User Capacity: 128,035,676,160 bytes [128 GB] Sector Size: 512 bytes logical/physical Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 4a Local Time is: Sun Sep 25 12:30:15 2011 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 10) seconds. Offline data collection capabilities: (0x15) SMART execute Offline immediate. No Auto Offline data collection support. Abort Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x00) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 100) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x0003 100 100 044 Pre-fail Always - 0 3 Spin_Up_Time 0x0003 100 100 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0002 100 100 020 Old_age Always - 0 5 Reallocated_Sector_Ct 0x0003 100 100 036 Pre-fail Always - 0 9 Power_On_Hours 0x0002 100 100 000 Old_age Always - 378 10 Spin_Retry_Count 0x0003 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0002 100 100 020 Old_age Always - 866 178 Used_Rsvd_Blk_Cnt_Chip 0x0003 100 100 010 Pre-fail Always - 1 187 Reported_Uncorrect 0x0002 100 100 000 Old_age Always - 1 190 Airflow_Temperature_Cel 0x0002 100 100 045 Old_age Always - 0 192 Power-Off_Retract_Count 0x0002 100 100 000 Old_age Always - 0 193 Load_Cycle_Count 0x0002 100 100 000 Old_age Always - 0 194 Temperature_Celsius 0x0002 100 100 000 Old_age Always - 0 195 Hardware_ECC_Recovered 0x0002 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0002 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0000 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0002 100 100 000 Old_age Always - 0 SMART Error Log Version: 1 Warning: ATA error count 0 inconsistent with error log pointer 4 ATA Error Count: 0 CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 0 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 00 40 60 6b b2 00 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 00 47 40 60 d6 9a 00 7c 39d+05:32:16.256 NOP [Reserved subcommand] 00 04 40 60 ca 9a 00 44 25d+00:45:18.720 NOP [Reserved subcommand] 00 04 40 60 35 83 00 43 39d+05:40:54.400 NOP [Reserved subcommand] 00 86 40 60 29 83 00 ab 47d+04:19:15.584 NOP [Reserved subcommand] 00 00 00 03 00 00 00 00 9d+21:58:22.976 NOP [Abort queued commands] Error -1 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 60 00 88 6b 00 00 00 at LBA = 0x0000006b = 107 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 40 61 e5 53 00 00 00 40 19:52:41.952 READ VERIFY SECTOR(S) 08 61 44 3c 00 00 00 40 15:14:03.432 DEVICE RESET 00 60 af 24 00 00 00 40 46d+12:01:24.488 NOP [Reserved subcommand] 08 60 a3 24 00 00 00 40 17d+17:41:31.976 DEVICE RESET 08 03 00 00 00 00 00 00 19d+16:00:37.952 DEVICE RESET Error -2 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 0d 4f 00 00 00 00 00 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 58 06 02 00 00 40 c0 55 18d+16:33:50.662 [RESERVED] b0 ee 01 00 00 08 08 b4 18d+16:33:31.994 [Vendor specific SMART command] b0 d7 01 00 00 08 08 13 18d+16:33:31.994 SMART WRITE ATTRIBUTE THRESHOLDS [NS, OBS-4] b0 bf 01 00 00 08 28 70 18d+16:33:31.994 [Reserved SMART command] b0 00 00 00 00 08 20 00 18d+16:33:31.994 [Reserved SMART command] Error -3 occurred at disk power-on lifetime: 768 hours (32 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 00 00 00 00 00 00 00 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 13 00 00 80 08 98 5a 01 32d+14:03:05.664 RECALIBRATE [RET-4] 13 00 00 80 08 98 5a 01 28d+00:05:48.224 RECALIBRATE [RET-4] 13 00 00 80 08 98 5a 01 23d+09:47:45.600 RECALIBRATE [RET-4] 13 00 00 80 08 98 5a 01 18d+19:40:38.336 RECALIBRATE [RET-4] 13 00 00 80 08 98 5a 00 14d+05:31:20.000 RECALIBRATE [RET-4] Error -4 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 98 31 5a 13 40 60 a7 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 1a 98 5a 13 40 60 06 08 24d+20:31:23.649 RECALIBRATE [RET-4] f9 1e 65 05 40 60 51 08 24d+20:31:23.648 [Reserved SET MAX command] e1 1e 65 05 40 60 af f8 5d+01:10:07.616 IDLE IMMEDIATE ca d8 44 03 40 61 0d f0 5d+01:10:07.616 WRITE DMA 00 00 00 00 00 03 00 00 1d+13:16:57.728 NOP [Abort queued commands] SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 150% 0 - # 2 Short offline Completed without error 150% 0 - # 3 Short offline Completed without error 150% 0 - # 4 Short offline Completed without error 150% 0 - # 5 Short offline Completed without error 150% 0 - # 6 Short offline Completed without error 150% 0 - # 7 Short offline Completed without error 150% 0 - # 8 Short offline Completed without error 150% 0 - # 9 Short offline Completed without error 150% 0 - #10 Short offline Completed without error 150% 0 - #11 Short offline Completed without error 150% 0 - #12 Short offline Completed without error 150% 0 - Device does not support Selective Self Tests/Logging Das häufige RECALIBRATE [RET-4] klingt nicht sehr schön oder ist das normal? Link to comment Share on other sites More sharing options...
madnisman Posted September 25, 2011 Author Share Posted September 25, 2011 Ich werde mich zurückmelden, obs erfolgreich war! Ja, wäre gut zu erfahren, ob es Dein Problem gelöst hat. @snowstorm: Da kann ich Dir leider nicht allzuviel zu sagen. Generell vertraue ich den SMART-Werten eher weniger (Fetsplatte ausgefallen ohne SMART-Warnung; jede Menge SMART-Warnungen und Platte läuft seit Jahren), zumal ein und dieselben Parameter von AIDA64 als 'OK', von PartedMagic aber als 'Pre-failure' erkannt werden. Ich weiss nicht ob Du das schon gefunden hast, aber das war das einzig sinnvolle, was ich mit Google finden konnte zum Thema RECALIBRATE [RET-4]. Das einzige was ich Dir raten kann: SecureErase, anschließend Win 7 sauber neu installieren (wie schon beschrieben). Falls das auch nichts bringt, wirst Du wohl um eine RMA nicht herumkommen. Ich kann nur empfehlen, eine Ersatz-HDD zuhause aufzubewahren, damit man trotz RMA ein funktionierendes System hat. Gruß, madnisman Link to comment Share on other sites More sharing options...
snowstorm Posted September 25, 2011 Share Posted September 25, 2011 Update: Die SSD ist tot. (internal) SecureErase dauerte extrem lange (~ halbe Stunde) und nach dem Reboot hat das BIOS merkwürdig lange gebraucht die SSD zu erkennen. Kein Programm erkennt sie mehr. Schreib- oder überhaupt Lesezugriff ist nicht mehr möglich. Einzig den Namen der SSD erkennen diverse Programme (nicht alle, für smartmontools ist es z.B. ein unknown device). Ich bin echt sauer. Ich hatte schon dutzende Festplatten ohne Defekt. Das allerblödeste: Die SSD war im Laptop meiner "besseren Hälfte" und dort einfach als Produktivplatte zum Arbeiten (Office, Internet, Musik etc.) eingebaut. Sie sollte einfach "nur funktionieren". Was lerne ich daraus: SSDs kann man nicht "blind" vertrauen (das kann man HDDs auch nicht, aber da hat man nicht immer dieses mulmige Gefühl ob heute oder morgen vielleicht der letzte Schreibzugriff ist). Link to comment Share on other sites More sharing options...
madnisman Posted September 26, 2011 Author Share Posted September 26, 2011 @snowstorm: Das ist natürlich bitter, aber dann war die SSD wohl ohnehin kurz vor dem Exitus. Leider sind SSDs nicht ganz so ausgereift bzw. stabil wie HDDs. Es ist echt empfehlenswert, eine Ersatzplatte zuhause im Schrank aufzubewahren. Link to comment Share on other sites More sharing options...
Corsair Employee Bluebeard Posted October 3, 2011 Corsair Employee Share Posted October 3, 2011 Korrekt - zumal es sich um eine ganz andere Baureihe handelt - dies war eine P3 (Marvell basierte) da kann man den Smart Werten absolut trauen! Link to comment Share on other sites More sharing options...
Fipz Posted October 9, 2011 Share Posted October 9, 2011 Habe die Neuinstallation nach einem SecureErase durchgeführt. Während und kurz nach der Neuinstallation war ich guter Dinge, das Problem behoben zu haben - jetzt gerade hatte ich allerdings wieder eine Freeze, nachdem das Notebook über Nacht aus war und vom Strom getrennt war... Link to comment Share on other sites More sharing options...
Fipz Posted October 9, 2011 Share Posted October 9, 2011 ... auch das StandBy-Problem ist weiterhin vorhanden, vorhin als ich zurückkam war das Notebook einfach aus. D.h. wohl zurück zur Festplatte, wenn man ein stabiles System haben möchte :mad: Link to comment Share on other sites More sharing options...
Corsair Employee Bluebeard Posted October 9, 2011 Corsair Employee Share Posted October 9, 2011 Führe einfach mal eine RMA der SSD durch wenn die HDD drin ist und teste es dann mit der neuen! Link to comment Share on other sites More sharing options...
bluescreen83 Posted October 23, 2011 Share Posted October 23, 2011 Hallo, habe das selbe Problem wie im ersten Post beschrieben. Die SSD ist seit 3 Tagen verbaut und das Problem trat vom ersten Tag an auf. Habe Win 7 64bit schon 5mal neuinstalliert. Firmware ist laut HD Tune 1.3.2; Part Number: CSSD-F120GBGT-BK; Die Nummer unterm Strichcode fängt mit 1140 an Was soll ich tun?? Danke für Eure Hilfe. MfG Link to comment Share on other sites More sharing options...
madnisman Posted October 23, 2011 Author Share Posted October 23, 2011 @bluescreen83: Hast Du vor den Neuinstallationen jeweils SecureErase gemacht? An welchem Port ist die SSD angeschlossen? AHCI im Bios aktiviert? Wäre außerdem gut zu wissen, welche Hardware Du hast (Mainboard, CPU, RAM, etc.; bitte im Profil eintragen und nicht hier posten), dann könnte man Dir gezielter helfen. Gruß, madnisman Link to comment Share on other sites More sharing options...
bluescreen83 Posted October 23, 2011 Share Posted October 23, 2011 Hallo madnisman, danke für Deine schnelle Antwort. Hardware in meinem Profil ist jetzt aktualisiert. Die SSD ist am laut INTEL Rapid Storage am Anschluss 0, auf dem Mainboard habe ich sie an den SATA Port 1 (6 Gb/s) angeschlossen. AHCI ist im BIOS aktiviert. SecureErase habe ich nicht durchgeführt. Was ich allerdings zwischen dem ersten und diesem Post gemacht habe ist: ich habe mir die LPM-reg-files runtergeladen und dadurch an allen Ports die LPM deaktiviert. Bis jetzt läufts.... MfG Link to comment Share on other sites More sharing options...
madnisman Posted October 23, 2011 Author Share Posted October 23, 2011 ich habe mir die LPM-reg-files runtergeladen und dadurch an allen Ports die LPM deaktiviert. Bis jetzt läufts.... Das hätte ich Dir auch empfohlen, hoffen wir mal, dass es so bleibt. Was Du auch noch machen könntest, wäre in den Energieoptionen den Punkt "Festplatte ausschalten nach" auf "Nie" einzustellen (s. erster Post). Falls Du trotzdem noch Probleme hast (zwischen einzelnen Bluescreens können durchaus 2-3 Wochen vergehen), würde ich Dir dringend raten, mit PartedMagic besagten SecureErase durchzuführen und anschließend Windows neu zu installieren. Gruß, madnisman Link to comment Share on other sites More sharing options...
bluescreen83 Posted October 23, 2011 Share Posted October 23, 2011 Festplatten abschalten war von Anfang an auf "Nie". Bluescreens hatte ich nie. Immer nur Freezes danach selbständiges rebooten bis zum BIOS, dort wurde dann die SSD nicht mehr erkannt. Erst nach kompletten ausschalten hat wieder alles funktioniert. So wie von Dir im ersten Post beschrieben. MfG Link to comment Share on other sites More sharing options...
bluescreen83 Posted October 23, 2011 Share Posted October 23, 2011 So leider gerade wieder eine Freeze beim downloaden von PartedMagic gehabt. Werde dann nochmal Windows neuinstallieren und vorher, wie Du es vorgeschlgane hast, SecureErase durchführen. Link to comment Share on other sites More sharing options...
Corsair Employee Bluebeard Posted October 23, 2011 Corsair Employee Share Posted October 23, 2011 Neueste Firmware ist 1.3.3 - Release war heute! http://forum.corsair.com/forums/showthread.php?t=100162 Diese Firmware löst alle bekannten Probleme die auf den SSD selbst zurückzuführen sind. Alle weiteren Probleme sind definitiv auf basis des verwendeten Mainboards (System Konfiguration) - meist basierend auf zu alter Hardware oder aber auf Basis einer defekten SSD! Link to comment Share on other sites More sharing options...
bluescreen83 Posted October 23, 2011 Share Posted October 23, 2011 Danke, iwe genau bekomm ich die Firmware aufgespielt? Mein Englisch ist nicht das beste. Die SSD ist jetzt per Parted Magic formatiert. Danke Link to comment Share on other sites More sharing options...
madnisman Posted October 23, 2011 Author Share Posted October 23, 2011 Danke, iwe genau bekomm ich die Firmware aufgespielt? - Du brauchst als erstes ein funktionierendes Windows 7. - Du lädst Dir exakt die Version runter, die für Deine SSD gedacht ist, also ForceGT 120 GB. - Die ZIP-Datei entpacken, anschließend die EXE-Datei als Administrator ausführen (rechtsklick auf die Datei -> "Als Administrator ausführen") - Das Programm zeigt Dir einige Informationen zur SSD, im Feld "Signature" steht dann xxx-xxx-yyyyy. Die yyyyy gut merken oder notieren. - Im Upgrade-Programm machst Du ein Häkchen vor dem Laufwerk, klickst auf "Update Firmware..." und wählst die VIC-Datei aus, deren Dateinamen mit den yyyyy übereinstimmt. - Warten, kann 20 sek. dauern. - Nach dem FW-Flash klickst Du auf "Rescan for drives", im Feld "FW Rev." sollte dann 1.3.3 stehen, damit war das Upgrade erfolgreich. - Neustarten Gruß, madnisman Link to comment Share on other sites More sharing options...
Corsair Employee Bluebeard Posted October 23, 2011 Corsair Employee Share Posted October 23, 2011 Danach bitte in den Werkszustand versetzen und keinesfalls formatieren! Sondern direkt das Win7 aufspielen! Link to comment Share on other sites More sharing options...
bluescreen83 Posted October 23, 2011 Share Posted October 23, 2011 Ändert sich nach dem Firmware-Update eigentlich die Signature? Link to comment Share on other sites More sharing options...
Corsair Employee Bluebeard Posted October 27, 2011 Corsair Employee Share Posted October 27, 2011 Was meinst Du - die Signatur zwecks Bitlocker? Link to comment Share on other sites More sharing options...
bluescreen83 Posted October 28, 2011 Share Posted October 28, 2011 Ich formuliere es mal anders. Ich habe vor dem Firmware-Update nicht die letzten 5 Zahlen der Signatur mit den 5-stelligen Zahlencode der 2 Dateien verglichen, sondern gleich die zweite Datei aufgespielt. Das Firmware-Update, im Allgemeinen für meine SSD, habe ich richtig ausgewählt, sprich FW 1.3.3 für die Corsair Force GT 120GB. Funktioniert die SSD mit beiden FW-Updates (22756.vic & 22757.vic) oder quittiert die SSD sofort ihren Dienst wenn ein falsches Update aufgespielt wurde? Die letzten 5 Zahlen der Signatur meiner SSD im "Corsair_FieldUpdater" ist identisch, mit denen der Datei die ich aufgespielt habe. Also hoffe ich das ich die richtige Datei ausgewählt habe. Ich hoffe das ich mich verständlich ausgedrückt habe. MfG Link to comment Share on other sites More sharing options...
Corsair Employee Bluebeard Posted November 5, 2011 Corsair Employee Share Posted November 5, 2011 Es würde garnicht erst aufspielen beim FW Upadate das nicht passt! Link to comment Share on other sites More sharing options...
Fipz Posted November 8, 2011 Share Posted November 8, 2011 Führe einfach mal eine RMA der SSD durch wenn die HDD drin ist und teste es dann mit der neuen! RMA durchgeführt, habe eine neue SSD mit aktueller Firmware bekommen. Die RMA-Dauer war ca. 1.5 Wochen. Bis jetzt läuft mein Notebook völlig stabil, alle Probleme sind so weit behoben. Auch wenn die Sache ärglich war - der Corsair Support funktioniert! Ein Lob von meiner Seite! Link to comment Share on other sites More sharing options...
Corsair Employee Bluebeard Posted November 14, 2011 Corsair Employee Share Posted November 14, 2011 Super, danke für das Feedback :-) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.