Rona Posted August 9, 2010 Share Posted August 9, 2010 I am in the process of buying/building a 800D watercooled system. I am looking to see if anyone who was built one prior can toss me some advice on what cathodes and lengths have worked best in there cases. I plan to use UV tubing so I would like to take full advantage of it and place cathodes in the system but I was hoping you guys could offer me some suggestions here. Thanks in advance! Link to comment Share on other sites More sharing options...
FantomAU Posted August 10, 2010 Share Posted August 10, 2010 I dont own them and they arent avail to purchase yet, But Lamptron is coming out with 1 called the Spectral Bar and is available in UV: http://www.lamptron.com/products/view/Spectral_Bar Link to comment Share on other sites More sharing options...
Synthohol Posted August 10, 2010 Share Posted August 10, 2010 these work great and are on the cheap!! http://www.microcenter.com/single_product_results.phtml?product_id=0245947 Link to comment Share on other sites More sharing options...
FantomAU Posted August 10, 2010 Share Posted August 10, 2010 I like the new logisys and lamptron spectral bar, Built in invertor, So no need for that pci bracket and invertor box, Just a 4pin molex connector ;) Not as cheap as those though, But does make hiding and routing alot easier Link to comment Share on other sites More sharing options...
Vengar Posted August 10, 2010 Share Posted August 10, 2010 I used the 12in logisys ones (3 of them) and those worked great for me and are pretty cheap. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.