Rambell Posted April 5, 2009 Share Posted April 5, 2009 You asked for descriptive titling. :p I'm building my first computer, and I just want to make sure that the split 8 pin ATX plug delivers 12v when using half of it (which is required for my MoBo whose brand won't mention), and also, does it matter which half I use? There is room for confusion in the manual. The MB has a 12v 4pin ATX plug which is required at some random spot. :S Sorry if noob question is noob :( Link to comment Share on other sites More sharing options...
Wired Posted April 5, 2009 Share Posted April 5, 2009 Yes, each delivers 12v. Link to comment Share on other sites More sharing options...
Rambell Posted April 5, 2009 Author Share Posted April 5, 2009 Thanks a lot. :) Link to comment Share on other sites More sharing options...
Garvin Posted April 5, 2009 Share Posted April 5, 2009 Look carefully at the 4-pin receptacle on the board, plug in the matching shaped 4-pin power supply plug (of the two 4-pin plugs making up the 8-pin connector). Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.