Rand Posted July 27, 2006 Share Posted July 27, 2006 Built a new system with an Asus m2n-E AM2 motherboard, using Twin2x2048-6400Pro memory. Will not boot when both memory sticks are installed in dual channel slots. Works fine with both installed as single channel. Have checked the basic memory timings and they seem consistent with SPD settings. Raised the memory voltage to 1.95volts; nothing seems to help. Are their other memory timings that need to me adjusted to allow the system to work in dual channel memory mode? Link to comment Share on other sites More sharing options...
Wired Posted July 27, 2006 Share Posted July 27, 2006 They're rated up to, but not over, 2.1 volts, so you may want to try a bit higher. Link to comment Share on other sites More sharing options...
Rand Posted July 27, 2006 Author Share Posted July 27, 2006 This motherboard only allows a maximum of 1.95 volts on the memory, which is what it's already set to. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.