ebbot Posted November 3, 2005 Share Posted November 3, 2005 i have Corsair TWINX2048-3200C2 DDR-DIMM 2048MB Kit w/two matched CMX1024-3200C2 DIMMs how i do when i clock in bios cas latency auto tras auto trp auto trcd auto trd auto trc auto trfc auto trwc auto twcl auto twr auto what shell i take instead to auto my first time i clock my ddr Link to comment Share on other sites More sharing options...
Wired Posted November 3, 2005 Share Posted November 3, 2005 CAS Latency (tCL): 2.0 (2.5 for AthlonXP systems) RAS to CAS Delay (tRCD): 3 Row Precharge (tRP): 3 Active to Precharge Delay (tRAS): 6 Memory Voltage: 2.75 Volts All other settings to defaults. Link to comment Share on other sites More sharing options...
ebbot Posted November 5, 2005 Author Share Posted November 5, 2005 ok thx . Link to comment Share on other sites More sharing options...
AHolland Posted November 7, 2005 Share Posted November 7, 2005 I have these same modules that I will soon be putting in an Asus P4C800-E 875 board. If I want to push my FSB a little, say to 220+, how much should I relax the timing settings? Understandably these modules may not be the best fo OC'ing, but I would think they can be pushed a little. Does anyone have a best guess as to how far they can be reasonably pushed and what settings they used: FSB, Timing, Voltage. Thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.