electrolyse Posted February 7, 2021 Share Posted February 7, 2021 Hey ! I just finished to build my new setup which include 12 fans and 2 commander pro, 1 already included inside the Obsidian 1000D, second one from the shop. On the included one, everything is working fine, the Icue soft does recognize the obsidian1000D and I can see all the fans there, but even if I plugged the second commander to the first (working) one via its USB (tried on both ports), I cannot see it into Icue. All its fans are working well as it is connected, but nada into Icue, I double checked the USB , so what I did wrong ? Do i have to connect seond commander on second USB port on my MB ? :confused: thank for the help Link to comment Share on other sites More sharing options...
electrolyse Posted February 9, 2021 Author Share Posted February 9, 2021 bumpbumpbumpbumpbump Link to comment Share on other sites More sharing options...
Aalb75 Posted February 10, 2021 Share Posted February 10, 2021 Hi Many motherboards do not provide enough power for the UBS passthrough to work on the commander pro. you have to options, if you have a available port usb 2.0 connector on your motherboard you can connect it to that. If not you can use a usb hub, I use a NZXT AC-IUSBH-M1 in my build Link to comment Share on other sites More sharing options...
electrolyse Posted February 11, 2021 Author Share Posted February 11, 2021 Hi Many motherboards do not provide enough power for the UBS passthrough to work on the commander pro. you have to options, if you have a available port usb 2.0 connector on your motherboard you can connect it to that. If not you can use a usb hub, I use a NZXT AC-IUSBH-M1 in my build I see, thank you much Link to comment Share on other sites More sharing options...
Recommended Posts