shoeprano27 Posted October 5, 2020 Share Posted October 5, 2020 i have a TU150 ITX case. i have 4 LL series white 120mm case fans.2 fans ill be pulling air from the bottom, 1 to pull from the front and the 4th one is to exhaust. I also have a hydro h60 and ill mount the radiator and fan on top. unless you guys have sme other or better sggestions or fplacing the fans, im listening. i wanted to ask you guys if i need any controllers/splitters/etc for all thats mentioned. do i also need specific wires? my first time building my own rig and i want to get thislittle thing uo and running. i look forward to hearing from you guys so i can immediately order it online. TIA. btw, i should probably mention thaat i have a corsair sf750 psu and an asus rog x570-i motherboard. Link to comment Share on other sites More sharing options...
c-attack Posted October 5, 2020 Share Posted October 5, 2020 Hopefully you bought a 3x120 multi-pack for the LL. You need 1 Lighting Node Pro (or other controller) and 1 RGB Lighting Hub to power the lighting on the fans. Both of those are in the multi-pack. LL fans (and all other Corsair RGB fans) have 1 wire for motor/speed control and 1 wire for lighting power. That's really the only requirement here. The H60 is a non-CUE cooler. It will run at a fixed pump speed, fan on a MB header to your settings, and if the the 2018 H60 it will light up white. Link to comment Share on other sites More sharing options...
Recommended Posts