SkyWriter Posted May 7, 2020 Share Posted May 7, 2020 I installed six ML 120 Pro RGB fans yesterday, they work fine but they aren't showing up in ICUE. They are connected to the RGB Hub that they come with and the RGB Node. Secondly My Vengeance RAM RGB lighting was working fine yesterday through ICUE but now I can't control the color and there is a red triangle over the image in ICUE. Link to comment Share on other sites More sharing options...
SkyWriter Posted May 7, 2020 Author Share Posted May 7, 2020 Restarted my PC and that solved the issue with the Vengeance RGB RAM but I still don't see the ML 120 Pro RGB fans on the ICUE. Link to comment Share on other sites More sharing options...
c-attack Posted May 8, 2020 Share Posted May 8, 2020 The RAM red triangle thing happens sporadically. I’ve gone 4 months and it never happens, then 3-4 times in a week. Somehow it locks up when iCUE loads, but aside from loosing the lighting it is harmless. As you’ve discovered, a System restart fixes it. The LNP or whichever lighting controller you are using, communicates with the software via the USB cable. If it does not show, try a different internal port or reconnect it to the current one. This is not a common issue on Z390 boards. Make sure your chipset and other MB drivers are up to date. Link to comment Share on other sites More sharing options...
Recommended Posts