Jump to content
Corsair Community

Corsair ONE PRO Ti RAM upgrade


Zoltane
 Share

Recommended Posts

Hi,

 

Since the VENGEANCE® LPX 32GB (2 x 16GB) DDR4 2400MHz (PC4-19200) C16 Memory Upgrade Kit is out of stock I was looking around for an alternative and found these:

 

Corsair VENGEANCE LPX 32GB (2x16GB) DDR4 3000MHz CMK32GX4M2D3000C16

 

Could I replace the 2x8Gb to those?

Link to comment
Share on other sites

UPDATE: From what I have read 2400MHz base and up to 4133OC is the highest supported, SO 3000 SHOULD WORK. IMPORTANT... Also make sure it's at 1.2 Volts. 1.35v ram will cause issues with the z270i custom MSI board installed. This was a staple discussion in the forum years ago, haven't heard if the bios updates ever resolved this. Get 1.2v to be safe. Edited by zguy85
Link to comment
Share on other sites

That's fine ya looks good. The 2400 c16 non overclocked is another $10 ,faster base clock, and better tested latency. That's what I would go with, and imagine would run cooler not being OC potentially. Edited by zguy85
Link to comment
Share on other sites

 Share

×
×
  • Create New...