TwistedXenos Posted September 9, 2019 Share Posted September 9, 2019 (edited) HI everyone! I would like to get second opinion if my temps are good or not under heavy load. I made a small video where i stress test my CPU. My case is Crystal 570x [ame=https://youtu.be/qgpaNmT_ejk]https://youtu.be/qgpaNmT_ejk[/ame] Edited September 9, 2019 by TwistedXenos Link to comment Share on other sites More sharing options...
Headz Posted September 9, 2019 Share Posted September 9, 2019 (edited) HI everyone! I would like to get second opinion if my temps are good or not under heavy load. I made a small video where i stress test my CPU. My case is Crystal 570x https://youtu.be/qgpaNmT_ejk Bump up the fan speeds to at least 1000rpm on load or more. Not sure if its intended but you are running them at 500rpms on 100% load? Edited September 9, 2019 by Headz Link to comment Share on other sites More sharing options...
TwistedXenos Posted September 9, 2019 Author Share Posted September 9, 2019 yeah i just left it on balance profile on commander pro and commander seems to automatically increase the fan speed. idk if you watched the whole video but at the more end of it the fans go above 1000rpm Link to comment Share on other sites More sharing options...
c-attack Posted September 9, 2019 Share Posted September 9, 2019 Based on a quick look, your coolant temperature (H150i Temp) only went up 3C during the test. That is about as low as it gets on an AIO. Fan and pump speed settings affect the coolant temperature, not the CPU directly. So +3C means your CPU temps are as low as possible for that voltage/settings within 3C. Not much else to do there. At longer loads, 1000 rpm is about where 120mm fans pick up the performance pace a bit. At 750 the RPM/degree Celsius change is a bit steeper. You shouldn't need more than 1300 rpm for anything. Link to comment Share on other sites More sharing options...
TwistedXenos Posted September 9, 2019 Author Share Posted September 9, 2019 ty for the replies guys ^^ Link to comment Share on other sites More sharing options...
TwistedXenos Posted September 10, 2019 Author Share Posted September 10, 2019 forgot to mention that cpu is overclocked to 4.8GHz Link to comment Share on other sites More sharing options...
Recommended Posts