Jump to content
Corsair Community

[Request] Fan Speed Sync All profile Option


smile689
 Share

Recommended Posts

attachment.php?attachmentid=36449&stc=1&d=1567174538

If i have many profile,

All profiles must be applied individually for Fan speed in commander pro and Hydro cooler.

 

During iCUE, a bug often disappear my setting of fan speed preset.

 

 

attachment.php?attachmentid=36450&stc=1&d=1567174538

so, i need like this option for Commander pro and hydro series.

142.thumb.JPG.20d9409281c6d6967c3a7247f061141e.JPG

123123.JPG.fa28cd2d5531814716afa0bf7d274085.JPG

Link to comment
Share on other sites

Do you mean this? https://forum.corsair.com/v3/showpost.php?p=1015775&postcount=4

 

 

I don't have a Hydro cooler on right now, but it should have the same option in the H115i Platinum -> performance tab -> same three line drop down.

 

You can/must "copy to all" for each fan header individually

 

Thank you. im idiot.

Of course They are made already.

Link to comment
Share on other sites

Do you mean this? https://forum.corsair.com/v3/showpost.php?p=1015775&postcount=4

 

 

I don't have a Hydro cooler on right now, but it should have the same option in the H115i Platinum -> performance tab -> same three line drop down.

 

You can/must "copy to all" for each fan header individually

 

 

 

i have a question.

Does this function not have a keyboard action?

Link to comment
Share on other sites

Profile switch? Or copy fan profile?

 

Profile switch is in the actions tab and can be bound to a key as well as custom profile groupings for the loop.

 

No, on the copy fan profile.

 

 

no for fan speed

 

about keyboard macro.

 

attachment.php?attachmentid=36464&stc=1&d=1567308637

1234.thumb.JPG.03bf48a9e67fc174b1bb1e80ded8adb3.JPG

Edited by smile689
Link to comment
Share on other sites

I think the only way to do this is to program each profile with the desired speed. So you have 3 copies of the same profile, each with low, medium, high fan speeds (or whatever) and set up a profile switch key to cycle between them. Loop the list so it cycles around.
Link to comment
Share on other sites

 Share

×
×
  • Create New...