Jump to content
Corsair Community

H100i Plat fan speeds


Gronar
 Share

Recommended Posts

That seems too large a variance for me. Can you try setting a manual fixed rpm or % in a custom curve? See if they move together. Then make it higher or lower. Does one fan routinely fail to catch up? The next step after that is to switch the fan connectors so fan 1->2 and 2->1. That may help identify if it is the fan or a software/hardware issue. Edited by c-attack
Link to comment
Share on other sites

That seems too large a variance for me. Can you try setting a manual fixed rpm or % in a custom curve? See if the move together. Make it higher or lower. Does one fan routinely fail to catch up? The next step after that is to switch the fan connectors so fan 1->2 and 2->1. That may help identify if it is the fan or a software/hardware issue.

 

Manual fixed RPM of 1500 and they are within 5-10 RPM of each other running at 1495-1505. Don't have the time today to swap the connector around and try that.

Link to comment
Share on other sites

 Share

×
×
  • Create New...