Jump to content
Corsair Community

help on my 570x


rjcs03
 Share

Recommended Posts

im currently building my own rig but i cant figure out why corsair logo on PSU area dont light up, my fans dont light up and spin.i have a maximus hero x motherboard, i7 8700k processor. can anybody provide me with the diagram. the 3 3 pin wires i think is where i messed up. corsair front logo and power button do light up tho. the mobo lights up and changes colors in a fading pattern.
Link to comment
Share on other sites

The PSU Logo connects via Sata power,

 

Assuming all the fans are SP120 that came with the case

The 3 pins from each fan connect to the RGB Fan controller that comes with the 570X case the RGB fan controller connects via Sata power.

 

I hope this is what you are referring too.

Link to comment
Share on other sites

The 3 pins connector should connect to the Mobo for the the 3 front fans I would connect them to channel fan 2, channel fan 3 and water pump fan header if you plan on running an exhaust fan I would connect the to channel fan 1 per the diagram

I would connect them here it would make cable management a bit easier instead of connecting all 3 fan to channel 1,2 and 3

 

 

 

98AA8294-D46A-4F2A-B1F5-3B4E0440D8F7.thumb.jpeg.b433f66f0b83d91d3ea7ae6f9cc8480f.jpeg

Link to comment
Share on other sites

 Share

×
×
  • Create New...