AVI4 Posted September 27, 2016 Share Posted September 27, 2016 Hi guys new poster here. Just installed the H110 and the fan cables are too short to reach the fan head pins at the bottom of my mobo. I have an ASROCK Z170A The fans are installed above the radiator in an exhaust config. They don't have a molex adapter on them either. I'm a bit stuck as to what to do. The pump is plugged in to my cpu header. Any help appreciated. Cheers guys. Link to comment Share on other sites More sharing options...
red-ray Posted September 27, 2016 Share Posted September 27, 2016 Get http://www.ebay.co.uk/itm/171861579106 or similar Link to comment Share on other sites More sharing options...
c-attack Posted September 27, 2016 Share Posted September 27, 2016 The extensions are one option. The other would be to move the H110 3 pin lead to the CHA_FAN2 header or one of the others. Then move the radiator fans to the CPU_FAN header on a splitter. There is no particular reason the H110 needs to have the pump on CPU FAN. Regardless of where you put it, make sure that header is set to 100%, full speed, maximum, or whatever language ASRock uses to describe the full 12v signal. Some boards also benefit from having the fans on CPU_FAN with more control options compared to a chassis fan header. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.