Peter Thornton Posted April 22, 2016 Share Posted April 22, 2016 Hello, together, I have allowed myself cpu and mainboard upgrade after my graphics gard was limited by my old Phenom II system. At the moment I use an **rock H87 Pro4 with a X3on 1230v3, however i have taken over my old Ram according to specifications on 1600Mhz, i have not paid attention at the voltage of the dimms. My 4x identical 2 GB Corsair Dominator need according to the print on the Heatspreader 1.8 volts, furthermore the following text is still printed: TW3X4G1600C9D - 9-9-9-24 ver8.1 My Mainboard Auto select 1,55v but i could choose manual max 1,8v so i would ask you guys to help me out by telling me what should i do? That is the only option which autoselect that is made by the board the other settings are not made by SPD i must choose it by myself. I dont want to destroy anything or a unstable system. http://fs5.directupload.net/images/160422/rr26zncs.png http://fs5.directupload.net/images/160422/jxs2i2pp.png by the way, i know what the picture says: CM3X2G1600C9DHX but its not true i really got 4x TW3X4G1600C9D thx for helping me greets from germany (If you dont understand anything i wrote, tell me and i will try to explain it) Link to comment Share on other sites More sharing options...
emissary42 Posted April 22, 2016 Share Posted April 22, 2016 Since those are rather old modules without a standard profile for DDR3-1333 even, they probably actually need lots of volts for higher frequencies. However i would not use them at 1.8V in a modern system. They might be stable at DDR3-1333 9-9-9-24 with something between 1.50V and 1.65V, but you would have to test that for yourself. Also find the german language support at: http://forum.corsair.com/forums/forumdisplay.php?f=182 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.