ImtheBest Posted January 28, 2015 Author Share Posted January 28, 2015 The pump says 0 and its not supposed to do that. and the H100i Led is working like shown is blank like u see not changing any colors also when i ooked at it the green had 2 instaed of one If you exit CL and run SIV what does [Link Status] report? What i put above is what shows me Link to comment Share on other sites More sharing options...
red-ray Posted January 28, 2015 Share Posted January 28, 2015 It's tricky to figure out these issues with limited information, so no SIV screen shots -> no reply! How many times do I have ask for both [Link Devices] and [Link Status] :confused: Over the years what I have been told has limited resemblance to what was actually reported by the system. Link to comment Share on other sites More sharing options...
ImtheBest Posted January 28, 2015 Author Share Posted January 28, 2015 Now after i did them ghost things in Device manager. 1 USB 3.0 in the front isn't working for some reason on my Corsair 750D Case. the next one to it is and all the rest in the back but the one i had my mouse pluggged into now doesn't work any thoughts on that I'll try to ge mor info for u on the H100i but i un pluggged it right now gonna pugg it back in see if that works. Link to comment Share on other sites More sharing options...
ImtheBest Posted January 29, 2015 Author Share Posted January 29, 2015 OK red-ray the ppump still does not show the temp and stuff and the H100i does not show the led light in the middle like it should or the temp. But after i deleted my profile in CL it showed everything right again like this.http://i.imgur.com/kJiemth.png see its right now But if i shuttdown and turn my pc back on i will get this http://i.imgur.com/rkvhAkO.png I really need some help on what to do i need it to be fixed Thank u Link to comment Share on other sites More sharing options...
Toasted Posted January 29, 2015 Share Posted January 29, 2015 The LINK software is not detecting your H100i. You can try a mini USB B to Type A cable instead as that seems to work better than the included cable for some users. Link to comment Share on other sites More sharing options...
ImtheBest Posted January 29, 2015 Author Share Posted January 29, 2015 The LINK software is not detecting your H100i. You can try a mini USB B to Type A cable instead as that seems to work better than the included cable for some users. I'm not sure what u mean on this? Thanks for your help. Link to comment Share on other sites More sharing options...
ImtheBest Posted January 29, 2015 Author Share Posted January 29, 2015 OK so it's finally working now everything is working fine now. When i first booted up CL it wasn't showing but closed it and reopened it and its showing now must just take a minute or so now just keep closeing CL and opening it it willl show takes a minute. Even my USB 3.0 on the front is working again just unplugged the 3.0 cable from motherboard and plugged it back in and all was good both USB 3.0 are working on my 750D case YahOO everything is fine now http://i.imgur.com/jcVTDsu.png Thank u All guys For your help really appreciate it All thanks and Cheers to u all Link to comment Share on other sites More sharing options...
ImtheBest Posted March 1, 2015 Author Share Posted March 1, 2015 If you want to use custom curves for the H100i fans then it's better to plug them into the H100i. This is what I do with my H100i. Hi red-ray thanks i finally found out that yes its does need to be in the H100i instead of the commander mini. U where RIGHT:eyebuldge, as u can't set the balanced mode or preference mode at all doesn't do anything so i hooked it back to the H100i and I"m all good now this time perfect. I get what u where saying now Thanks:biggrin: Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.