GyGaByTe_28 Posted July 30, 2014 Share Posted July 30, 2014 helo my friends.I have a cuestion :roll: is this pefect? the psu is a RM650 in idle http://img.tapatalk.com/d/14/07/31/erybu5ej.jpg in charge http://img.tapatalk.com/d/14/07/31/ga5ydy4e.jpg thanks ;): Link to comment Share on other sites More sharing options...
EnterName Posted July 30, 2014 Share Posted July 30, 2014 Everything looks good. Link to comment Share on other sites More sharing options...
GyGaByTe_28 Posted July 30, 2014 Author Share Posted July 30, 2014 Everything looks good. Okay perfect!!!!! :D: Link to comment Share on other sites More sharing options...
Corsair Employee Fauxbeard Posted July 30, 2014 Corsair Employee Share Posted July 30, 2014 Can confirm. Remember that the 12V, 5V, and 3.3V is allowed to fluctuate between ±5% to stay remain in spec. Link to comment Share on other sites More sharing options...
GyGaByTe_28 Posted August 2, 2014 Author Share Posted August 2, 2014 when using Furmark the Rail +12v at 12,196v go to 12,000v Are Okay? this is more of 5% + - :sigh!: My PSU have a little bit coil whine is this the reason of the problem volts :confused: ? Link to comment Share on other sites More sharing options...
JKeifer Posted August 3, 2014 Share Posted August 3, 2014 No, the 12v rail could be between 11.4 volts and 12.6 volts and still be in tolerance. Whine is a different thing altogether and is not indicative of a power supply being out of tolerance. Link to comment Share on other sites More sharing options...
GyGaByTe_28 Posted August 3, 2014 Author Share Posted August 3, 2014 No, the 12v rail could be between 11.4 volts and 12.6 volts and still be in tolerance. Whine is a different thing altogether and is not indicative of a power supply being out of tolerance. okay,my psu rm is very hot is it normal? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.