Jump to content
Corsair Community

Corsair GS700 - 11.3v at 12v rail?


Marvin Schilder

Recommended Posts

i5 4670k

Asus H87M-Plus

2xDDR3 1600Mhz

2xSSD on raid 0

1xHDD

GTX 770

Air Cooler, no led, no adicional coolers, no overclock.

 

I'm quite disappointed with randomly shutdown, especially gaming.

Checking system monitors (i know, i should get a voltmeter, but i dont have it right now), PSU provided 11.328v. Did I chose a wrong PSU with this config?

1277824492_PrintScreen.thumb.jpg.72309609e608c8b7a82356ffddfefa3b.jpg

Link to comment
Share on other sites

That PSU is more than sufficient for your build.

 

The voltage shown in software is not accurate at all for the most part, as an example on my CX 750, in HWmonitor when system is under load it reads 11,74v, measured with volt meter it reads 12.10v, i wouldn't count on software readings.

 

If possible, i would try borrowing a PSU from someone and doing some test with it to see if the problem still exists.

Link to comment
Share on other sites

That PSU is more than sufficient for your build.

 

The voltage shown in software is not accurate at all for the most part, as an example on my CX 750, in HWmonitor when system is under load it reads 11,74v, measured with volt meter it reads 12.10v, i wouldn't count on software readings.

 

If possible, i would try borrowing a PSU from someone and doing some test with it to see if the problem still exists.

 

I bought a Volt Meter. Keep 12.28V with GPU Benckmark. Ty.

Now I'm analyzing my home energy system, but the pc still shuting down.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...