trialkiller Posted July 8, 2014 Share Posted July 8, 2014 Hello I have a cooling system h80 since 1 year , but now the tube is broke and its lossing liquid and it makes the CPU unusable , I want to repair that, but I Dont know what kind of liquid have the system, or where to buy a new tubes. Could you help me? reggards Victor p Link to comment Share on other sites More sharing options...
sandstorm1 Posted July 8, 2014 Share Posted July 8, 2014 its a sealed unit and not meant to be repaired. best to start a rma process. Link to comment Share on other sites More sharing options...
RhooK20 Posted July 9, 2014 Share Posted July 9, 2014 If it's still under warranty process an RMA, if out of warranty you could use a different tube and use barbs to seal it, you could also add a res to fill it properly and use distilled water. Link to comment Share on other sites More sharing options...
wytnyt Posted July 9, 2014 Share Posted July 9, 2014 If it's still under warranty process an RMA, if out of warranty you could use a different tube and use barbs to seal it, you could also add a res to fill it properly and use distilled water. the pump really isnt designed for all this as it barely produces a constant flow which is adequate for its sealed unit. Link to comment Share on other sites More sharing options...
RhooK20 Posted July 9, 2014 Share Posted July 9, 2014 the pump really isnt designed for all this as it barely produces a constant flow which is adequate for its sealed unit. Haven't personally made one but I've seen a few with a res and it works properly. Link to comment Share on other sites More sharing options...
Nichrome Posted July 13, 2014 Share Posted July 13, 2014 I would just RMA this. Also make a note to Corsair IF the leak has broken anything (e.g. VGA, motherboard etc). I think they should cover this too if it broke something else than just cooler itself. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.