Search the Community
Showing results for tags 'memory issue'.
Found 4 results
-
I recently purchased 4x16 GB sticks of Vengeance RGB Pro. Installed them, everything went fine. Fired up CPU-Z to see 2666. Checked task manager and 2666. Went into bios, newest update, 2666. Set it to 3200, XMP on auto Config, reboot, 2666 again. Setting says 3200 but it sits at 2666. Set it to DOCP, 3200, motherboard Orange light, no boot, CMOS needs reset. Ai tweaker auto tune sets it to 2731. I've never manually set Ram before. If you can help or have a guide, I'd be super happy and appreciative. Specs: ROG Strix b-450 Gaming ii Motherboard Liquid cooled Ryzen 7 5800x CPU RX 5700XT GPU Vengeance RGB Pro and optimized 4x16 sticks 3600mhz Lost my sanity somewhere in the build so I no longer have that.
-
Hi I have spent a month now trying to get the above sticks to show the full 16gb but they only ever show 8gb in the bios and windows 10. I have tried following various forums etc. My spec is: Motherboard: Gigabyte F2A78M-DS2 BIOS: American Megatrends version F6e CPU: AMD Athlon X4 760K Quad Core Processor OS: Windows 10 64bit Any help would be really appreciated as I'm at a loss now. Thanks for reading. -
Hi, I recently ordered a new set of Vengeance LPX memory, 2 x 8GB - 16GB, and it is rated for 3200Mhz. I checked with my motherboards overclocking capabilities and it is rated up to 3200MHz, however when I set my DRAM-Frequency to DDR4-3200Mhz in my BIOS and checked both Task Manager and CPU-Z neither showed any increase to the speed.
-
Hello, i have 4 sticks of 4gb of the same RAM (CMK8GX4M2A2400C16R), 2 are ver. 3.21 and the other 2 are 5.20, because i didn't buy them at the same time. I have a x470 gaming plus max and r5 3600. When i use only 2 sticks and default bios settings, i get 2400Mhz and no problems playing COD, but when i add 1 more or 2 it goes to 2133Mhz and i start crashing at COD. I'd like some explaining or something helpful i could do to solve this problem. Thanks Luis
