urgent information corsair h50

Hello everyone,

two weeks ago, I sent in my RMA motherbord. I forgot to remove the stickers of the adapter socket.

 

here's the picture:

http://img706.imageshack.us/img706/315/immagineris.png

 

serve for a second installation?

If I remount without it, nothing can happen?

 

if needed, how can I recover them? where? Who to contact?

I noticed that in many other heatsinks stickers there are .....

P.S. Excuse my English but I'm Italian

The only purpose they have is to stop the bracket falling away from the back of the motherboard when applying the mounting system.

The only purpose they have is to stop the bracket falling away from the back of the motherboard when applying the mounting system.

I know, so I can do without?

yes you can do without, install the backside bracket and the pump mount on the top side before you install the motherboard, that way the pump retainer bracket will help hold it in place while you install the MB

yes you can do without, install the backside bracket and the pump mount on the top side before you install the motherboard, that way the pump retainer bracket will help hold it in place while you install the MB

 

good, firts thanks for reply....then installed the pump in order properly and then I get on the motherbord in the case, right?

 

excuse my bad english

right,

will work with out the tape

You could also buy new tape if you want to use tape. A hobby or hardware store should have it.