zyy648663269 Posted August 10, 2014 Share Posted August 10, 2014 Im sorry if my english is bad. I ve installed a Pc today. but i noticed even if i use a stress test to test the cpu the rm750 s fan is still not working. I suppose there is more wattage use than 40% So i thought there is something wrong with the cabel inside the motherboard. I use the Z97 killer board from ASRock. and there ist the PWR_FAN slot with 3 pins. And I have only one cable with 3 pins. and then I used it. Now is my proble,: On the other side of the 3 pins cable is a slot with 4 pins. I can only stick this 4 pins slot in the c-link slot on the psu. I think Im wrong with what im doing do i? I heard the c-link slot is only for controlls and not for power supplies fans am i right? Link to comment Share on other sites More sharing options...
sandstorm1 Posted August 10, 2014 Share Posted August 10, 2014 c link is for corsair link kit and NOT for power. Link to comment Share on other sites More sharing options...
sandstorm1 Posted August 10, 2014 Share Posted August 10, 2014 also what are all the parts in your computer? Link to comment Share on other sites More sharing options...
zyy648663269 Posted August 10, 2014 Author Share Posted August 10, 2014 I dont have the list now and I will send u what i know Intel i7 4790k GTX 780Ti ASRock Z97 Killer 8GB DIMM DDR3-2400 RAM Corsair RM750 be quiet Tower cooler Seagate Barracuda SATA III 2TB 240gb crucial m500 and a LG dvd-room but i forgot the name Link to comment Share on other sites More sharing options...
Corsair Employee jonnyguru Posted August 11, 2014 Corsair Employee Share Posted August 11, 2014 With just the one graphics card, it doesn't matter if you stress the CPU and GPU simultaneously. You're still not using enough power and/or generating enough heat inside the PSU to make that 750W's fan spin. You're probably only using about 450W. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.