2stronk Posted November 28, 2018 Share Posted November 28, 2018 I've bought 2 LL140 RGB fans with a lightning node pro, but only one of the fans light up. They both worked at the same time when I started it up shortly after installing the fans. They ran the demo rainbow pattern, but once I booted into windows one of the fans turned off and won't turn on again. The only fan that will light up is the one that I put into the first slot on the LNP. How can I get both working? I've tried swapping them, but whichever I put into slot 2 simply wont work Also I am currently in channel 2 on the LNP and I am still having the same issue. Furthermore, the firmware of the LNP will not update through iCUE. I have tried to push in the button on the device with a pin but the firmware folder will not open either, so I can't even update manually. This is so weird because I know the fans aren't faulty since they both have lit up before and are also spinning. Its frustrating as hell because the first time I booted right after installing & wiring the fans they both lit up in that rainbow demo pattern, untill I booted into windows Furthermore, the firmware of the LNP will not update through iCUE. I have tried to push in the button on the device with a pin but the firmware folder will not open either, so I can't even update manually. Link to comment Share on other sites More sharing options...
2stronk Posted November 28, 2018 Author Share Posted November 28, 2018 Mistake in the title, they are actually LL140s. apologies Link to comment Share on other sites More sharing options...
DevBiker Posted November 28, 2018 Share Posted November 28, 2018 Can you validate that you've set up iCue for both fans on the channel that it's connected to? And I'm assuming that they are connected to a Fan Hub and the Fan Hub is connected to the Lighting Node Pro, correct? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.