Deheugden Posted September 29, 2019 Share Posted September 29, 2019 Guys, I purchased this psu, but i dont know how to connect the cables(maybe i am getting old). It is completely different from my old psu(Xilence) and the manual that vae with the box, isnt a manual. F.I. i dont know which part of the cables needs to be connected to the mainboard and which part where in the psu. I dont know which cable to connect to my GPU, and so on. I watched Youtube, but beside some unboxing vids i cant find a tutorial. Hope some can help. Link to comment Share on other sites More sharing options...
Mr Mcgoo Posted September 30, 2019 Share Posted September 30, 2019 The cables should be labelled. So pcie cables are for your gpu and eps/cpu for your cpu and atx the large 24-28 pin cable for the motherboard. pcie cables plug the part of the cable that has pcie on into your gpu and the other end into the pci connectors on your psu. eps/cpu cable into the connectors near the vrm (usually top right of motherboard) and other end into the cpu connector on psu. Finally the 24 pin connector into the large connector by the ram slots and other end into the 24 pin atx connector on the psu. if you need anymore help just PM me :) Link to comment Share on other sites More sharing options...
Deheugden Posted September 30, 2019 Author Share Posted September 30, 2019 Many thanks for the reply. Will give it a shot. Link to comment Share on other sites More sharing options...
Mr Mcgoo Posted October 3, 2019 Share Posted October 3, 2019 any luck with the installation of the cables? Link to comment Share on other sites More sharing options...
Recommended Posts