Bostoncooler Posted August 27, 2019 Share Posted August 27, 2019 Case: Obsidian 500D SE Cooler: H100i RGB Platinum SE Mobo: ASRock Taichi Z390 RGB: Commander Pro + RGB Hub Hi all! Recently bought a RGB setup and put it all together yesterday. Everything is working though I haven't fully completed the build (wire management, button it up). I had three quick questions looking for some input on. Cooler wires from the pump: I currently have 6 LL120 fans in the case (includes the 2 on the AIO). All fan rgb wires hooked to the rgb hub and 4 fans powered by the commander pro (the 2 fans on AIO I have connected to the CPU_Fan headers on mobo). My question is there are wires coming from the pump that I have not connected and am unsure where to connect to. I have connected the SATA and the USB , I believe there are 4 other wires I have not connected. Do these NEED to be connected? What for? I believe they are all male connectors... I'm thinking to tie them up in the back? AIO Fan Ramp Up Noise Level: Is it me or is the noise level a little loud? Granted I still have both side panels off the case so I can hear everything well but it seems pretty loud. Since I don't have the AIO fans hooked up to the commander pro I'd have to monitor the RPMs a different way. Is there a setting in BIOs to change when using this setup? I may have read something about that before, maybe outdated. Top side AIO Mount: The case comes with a top radiator mounting bracket and I forgot to use the washers for the top mounting screws, could this be adding to noise? Has anyone mounted without the washers as the manual shows to use? Thanks for any help/info you could provide. Sorry for the length. Cheers. Link to comment Share on other sites More sharing options...
xMacias Posted August 27, 2019 Share Posted August 27, 2019 "there are wires coming from the pump that I have not connected" - This is for the fans that come with the pump so they can be powered by the pump (both Fan and RGB) and controlled together Link to comment Share on other sites More sharing options...
Bostoncooler Posted August 27, 2019 Author Share Posted August 27, 2019 (edited) So I would remove those two fans from the rgb hub and the motherboard and plug them both into those 4 wires I assume. Wouldn't this cause a no cpu fan error since nothing will be plugged into the mobo slots? edit: is there a key difference connecting them through the pump rather than having them connected to the mobo and rgb fan hub? Edited August 27, 2019 by Bostoncooler Link to comment Share on other sites More sharing options...
Recommended Posts