sagittaru Posted March 1, 2009 Share Posted March 1, 2009 Ok, here it goes. I want to upgrade my memory, but not sure what kind of RAM will works with my system. If possible I would like to upgrade to at least 4gb @ 1066mhz ram? My concern is, are all evga 680i SLI model RAMs the same? Since I am not sure what part number my mobo is, only know for sure its evga 680i sli. thanks.. Link to comment Share on other sites More sharing options...
DerekT Posted March 1, 2009 Share Posted March 1, 2009 These are the ones I would choose for your board. TWIN2X4096-8500C5 CORSAIR 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Dual Channel Kit Desktop Memory - Retail Link to comment Share on other sites More sharing options...
sagittaru Posted March 2, 2009 Author Share Posted March 2, 2009 Just to make sure before buying TWIN2X4096-8500C5. So when it arrives, I just put both stick in slot 1 and 3 without any other configurations, and it will run as it should @ 1066mhz? how about my FSB? evga 680i SLI is 1066/1333? Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted March 2, 2009 Corsair Employee Share Posted March 2, 2009 You will need to manually configure your BIOS to run the memory at 1066. It will not be automatically set to the tested settings. Please consult your users manual and find the memory portion in the BIOS settings area. You have several options depending on if you intend to OC or not and how much. Here are your tested settings: http://www.corsair.com/_datasheets/TWIN2X4096-8500C5.pdf Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.