Tripater

I used the master branch too, don't worry, I just figured I wouldn't lose anything if I tried the patch branch to see if the problem was solved or not (Read about the corruption issue with an incorrect command and thought it could have had something to do with my problem). Anyway, I'm using a UNO board, so I guess that's the problem. Any workaround? Forgot to add: Yes I can get the report from the board just fine and the values look all correct (Or at least the brightness looks correct, it's the only value I can change that behaves almost normally, it works 50% of the times). And loading the settings from memory using the dollar symbol ($) works fine 100% of the times. Thank you for taking the time to help me.

I've tried everything but I can't get the code to work, even just adjusting the global brightness doesn't work properly, sometimes it takes the values and sets them, sometimes it sets totally different values in different place, like when I try to pulse brightness with global mode 1 sometimes it does nothing, other times it just sets the brightness for all fans to 0, only 2 times the command worked properly. And it's not even that I don't know the commands, I'm pretty sure I figured them all out, it's not too difficult, but even if that was the case, the behavior is messed up even with an external program such as kubdotnet's Led Controller Engine, no matter what I select, when I apply the changes the fans do totally different things, even if I just set a static color for all fans, one will cycle the rainbow effect, one will be one static color while another one will be another random color, one will have its leds completely off and so on. Tried to change the number of fans; nothing. Tried to test with just one fan plugged; nothing. Tried with a different arduino board; nothing. Tried different digital pins; nothing. Tried every possible combination of every version of FastLed, Charixfox's own code (Patch branch included), and kubdotnet's Led Controller Engine; still nothing. I really don't know what to do that isn't writing my own code, but seeing as this one is almost ready to go with the addition of Led Controller Engine (And I'm terrible at developing frontends and UIs), if it can be made to work, I would prefer that. Thanks for any help.