The Corsair User Forums

The Corsair User Forums (https://forum.corsair.com/forums/index.php)
-   iCUE Software (https://forum.corsair.com/forums/forumdisplay.php?f=280)
-   -   Node pro not working after changing Motherboard (https://forum.corsair.com/forums/showthread.php?t=188926)

Dante! 07-20-2019 09:58 PM

Node pro not working after changing Motherboard
 
Hi guys,

Before my z170 spoil, the node pro was working fine, after i changed the MB to Z270a-pro, the node pro is not detected in the Icue, however my Corsair veng pro RGB is still working fine.

using USBDeview, i can see that VID 1b1c is connected.

Please advise.

DevBiker 07-21-2019 12:52 AM

VID 1b1c is the Vendor ID for Corsair. We'd need the PID (Product ID) to see if it's a lighting node pro.

Also, please fill out some system details.

Dante! 07-21-2019 11:50 AM

Quote:

Originally Posted by DevBiker (Post 1011950)
VID 1b1c is the Vendor ID for Corsair. We'd need the PID (Product ID) to see if it's a lighting node pro.

Also, please fill out some system details.

Theres two PID code 0c0b and 0c0c. I've filled in system details.

DevBiker 07-21-2019 07:12 PM

0c0b is the PID for the Lighting Node Pro - so it's showing up in Windows. I'm assuming that it's showing up there in green in USBDeView? Note that USBDeView will show disconnected devices by default (you can change this in Options).
Verify that the Corsair Service is running. Did you reinstall when swapping the motherboard?

Dante! 07-22-2019 05:38 AM

i'm using the same SSD. nothing changed only the MB.

after i changed the MB its not working. i tried to troubleshoot, and reinstalling Icue but ofcoz it doesnt work.

DevBiker 07-22-2019 07:59 AM

Quote:

Originally Posted by Dante! (Post 1012060)
i'm using the same SSD. nothing changed only the MB.

after i changed the MB its not working. i tried to troubleshoot, and reinstalling Icue but ofcoz it doesnt work.

Can you confirm that it shows as green in USBDeView?

And if you just changed out the motherboard, you'll likely need to install the chipset drivers. Honestly, sometimes you can get that to work fine ... sometimes not so much.


All times are GMT -4. The time now is 12:12 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.