stehilton94

Hi Guys, I have 9 LL120 Fans , 3 connected to my 150i Pro which has its own RGB Hub and then 6 on another separate hub, 3 at the bottom of my case populating 1-3 on the other hub and 3 on the side of my case populating 4-6, case is a Lial Li O-11 D for reference. I have both RGB Channels connected to my Commander Pro, the 6 in port 1 and 3 from the 150i Pro in port 2. Fans all 9 fans work in terms of spinning and speed control. Fans 1-3 on port 1 work without issue and the other fans 1-3 in the other Port 2 work fine. My issue is specifically with fans in port 4-6. These 3 fans will not working in any way with RGB, no matter what colour or profile I use they completely spaz out and go random colours and flicker most of the time. I understand "Maybe you got a bad batch" but I have replaced 6 fans to date and both RGB hubs and its always the same issues, 3 fans will not work properly out of the 9. Has anyone got any idea what to do? I am just short of completely removing anything corsair from my build and going to a different brand because I have spent roughly €500 on corsair fans at this stage and it still does not work. I built this in 2020 and just lived with it until now btw, 2021 I tried 6 new fans and 2 new hubs and still no fix.

Hi guys, I currently have 9 fans in my case, alot I know but I wanted more for better temps, Lian Li o11 Dynamic. The issue I am having is that even at idle my fans are going crazy loud, 3 connected via the h150i and another 6 connected to a commander pro The H150i fans seem to run ok, but the other 6 are 1500rpm even on quiet and do not drop, when I set my own curve it doesn't work very well because temps become an issue Anyone any ideas? I have a Gigabyte Arous Master z390 and a i9 9900k

Just wondering if anyone can help me, I am have lots of issues with my current setup, I have 3 ll120 fans connected to my h150i AIO, they are connected to 3 ports on my Corsair LED fan hub, I have another 3 fans on my case, all 6 are the same fans and connected to the LED hub, I have 3, the case fans, connected to my Commander pro and the other 3 connected directly to the supplied connectors of the H150i, But when in action the colours of the 6 fans seem to spas out, has anyone experienced this or know any way to fix it? Do I need hubs? one for the case fans and 1 for the AIO fans?

To be honest the only game I have noticed it with so far is Destiny 2, as for moving the fans on the Lighting Hub, I tried to remove the connections before and found it sooooo hard to get them out, any tips on how to remove them? I feel Like I am going to break them?

Hi guys, I have a total of 6 Corsair LL120 fans in my Case, including a Corsair H100i Pro CPU Cooler. 3 On the case itself, 2 on the Radiator of the CPU and 1 on the Radiator of the GPU The iCue was working perfectly for around 6-7 months, since I got it, no issues. All of a sudden the 1 LL120 fan on my GPU Radiator has started going crazy (ONLY WHEN GAMING) . The colour goes completely out of sync and when I rotate the static colour circle in the iCue app itself the fan in question goes completely different colours with the slightest move while all others change normally. After gaming, around 10-20 minutes afterwards while not in game, the fan will revert back to being in sync with all other fans and have no issues. Can anyone help me? I posted here because I am not sure if it is a iCue issue or an issue with the fan itself, so please move if needed. Thanks for any help.