thefosterhouse

unfortunately, that didn't work. tried all the steps you mentioned, exporting and importing the profile, uninstall and reinstall, and nothing worked. profile would not allow changes. had to recreate the profile from scratch.

no matter what I do, iCue sets my fan speed for my H100i Pro to "Extreme" and won't let me change it. I have custom curves set up and I can use the pull down menu to change the settings for the AIO fans, but the RPMs don't change, and then when i switch to another device in iCue and switch back to the H100i, the settings are set back to Extreme. I'm using the fans that came with the AIO. if i create a new Profile i can change the AIO fan settings, but this will involve resetting all my other devices' settings. why can't i change this one thing? my fans just suddenly started going full speed and can't figure out why. i don't have any other monitoring software on my machine and I'm not OCing my machine. the CPU is a cool 31C and yet the fans are running like it's on fire.

thanks for the reply! I guess I'll look at switching my CPU and GPU radiators. having the CPU in front should help a lot. My GPU has never gotten above 34C so I think it'll be fine in the top of my case. I'm seriously tempted to take my case's top panel to a friend of mine and have him C&C a ton of vent holes in it.

Just finished my PC Build for a workstation and I'm a bit confused as to the temperatures I'm seeing. I have a 9900X with a H100i cooling it. I'm seeing the coolant temps in iCUE range fro 32C (baseline) to as high as 42C for heavy workloads, but it's mostly around 38C for most cpu heavy work. The issue is that I'm seeing CPU temps as high as 78C and it'l hang there for a while. I'm not overclocking my CPU except for enabling XMP. I was thinking about OC a little bit to help with render times, but not until I better understand what I'm seeing here. My Cpu temps have been around 36C at idle, and around 60C during rendering, but there are times when the temps spike in the high 70s for a while during heavy rendering. After seeing that, I've switched my Pump from Balanced to Extreme while the Cooler Fans have been using the Balanced Fan curve. That has kept the highest temps down to 74C, but the setting just seem way too high for a non overclocked CPU. Are these normal temps that I'm seeing or is there something wrong? I feel that I'm being overly cautious, but I can't help it. I've ordered a Commander Pro to centralize all the fan controls, but it'll be a few days before I can get it. I set iCUE to launch on startup, but I still have to manually launch it for some reason. does it need to be actively open for the profiles to run properly? CPU: Intel 9900X not overclocked VCORE (VCPU in iCUE) doesn't move from .94V even though the graph moves around a lot, Vcore in HWiNFO64 peaked at 1.176V Coolant temp peaked @ 42C, hangs around 39C for heavy loads and 32C for baseline. Ambient Temps are around 24C CPU Cooler is top mounted as intake (Push) GPU is Nvidia 2080 ti Waterforce front mounted in push/pull testing temperatures in HWiNFO64 sensor status and iCue (since the H100i sensor readings don't show up in HWiNFO)